• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

I need M939 series belt part numbers...

goldneagle

Well-known member
4,507
1,002
113
Location
Slidell, LA
Yes I tried to search for them. Not sure if the M809 series belts for the NHC250 are the same.

I need NAPA part numbers for all the belts for the M931 truck. Thanks in advance!
 

M923driver

New member
149
4
0
Location
Guntersville, AL
Not the answer you wanted, but I have a set for the M939 series, not A2. I got them with a bunch of other stuff but they are V belts and my A2 uses a serpentine one. Let me know if you want them.
 

goldneagle

Well-known member
4,507
1,002
113
Location
Slidell, LA
Not the answer you wanted, but I have a set for the M939 series, not A2. I got them with a bunch of other stuff but they are V belts and my A2 uses a serpentine one. Let me know if you want them.
Would you mind posting the part numbers for them? I would also be interested in an extra set. I need to get them for tomorrow or Tuesday so I can get my truck out of my friends parking lot.
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
The 800 series and the 923 series use the same engine. I would think the belts are the same.

I don't have the 900 series manuals handy but tomorrow I will lookup the part numbers in the parts TMs and see if they are the same.
 

juanprado

Well-known member
Steel Soldiers Supporter
5,613
2,918
113
Location
Metairie/La (N'awlins)
NHC 250 belts

Water Pump is correct as a NAPA 25-22425.

There is a vendor on ebay that sells the OE water pump belt and you will appreciate how much PIA that swap is. (search 22425 Pix fan Belt 3019061 Cummins) Their belt is NOS and wider than NAPA. I like how it fits the pulley higher and the even number of ribs on the bottom. I had ordered it as a spare but used it instead of the NAPA.





Fan clutch matched set of 25-28492
power stg matched set of 25-9480
Alt matched set of 24-7480 - Mine came with a Fractional horsepower 4L480 which is crazy to use this type of belt! Different angle and groove on the pulley.

If you are going to Slidell ask for James and tell him Juan sent ya.;)

Good luck on your storm prep:grd:
 
Last edited:
1,540
62
0
Location
Riyadh, Saudi Arabia
Im still looking for the correct part number for the Air compressor belt, Power steering belt, Alternator belt, and Fan belt for the my M931A1. The non turbo charged NHC-250. Id like to be sure there isnt a different belt needed. I cant seem to find a cross over reference for the NSN numbers.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
One option is to google each part number.

Here's what I found when I searched the fan belts,

END ITEM IDENTIFICATION:2320-01-050-2084; W/S: AIRBORNE MOBILE DI AIR SPT CTL (2ID), (02M JUL83) (AN/UYQ-3A); AIRCRAFT, T-39; SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE); RADAR SET, FIREFINDER (AN/TPQ-36); TRUCK DUMP, 5-TON, 6X6 (M929, M930); TRUCK, TRACTOR, 5-TON (M818, M931); TRUCK, WRECKER 5-TON (M936); TRUCK, CARGO, DROPSIDE, XLWB, 5-TON, 6X6 (M814, M927, M928); TRUCK, CARGO, DROPSIDE, 5-TON, 6X6 (M813A1, M-923, M-925); TRUCK, FIRE/CRASH P10
PERFORMANCE TYPE:STANDARD CAPACITY
CROSS-SECTIONAL SIZE:SAE 7/8
NOMINAL WIDTH:0.500 INCHES
NOMINAL EFFECTIVE OUTSIDE LENGTH:49.000 INCHES
BELT QUANTITY:2
SPECIAL FEATURES:LOW TEMPERATURE REQUIREMENT,MINUS 65 DEGREES FAHRENHEIT
MATERIAL:RUBBER BODY
STYLE DESIGNATOR:A2 COG OR NOTCHED
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
Last edited:
1,540
62
0
Location
Riyadh, Saudi Arabia
Yeah I finally found that through using google. But if you read the thread golden eagle points out that all the parts numbers in the thread are the 800 series and the M939 Series may use a different fan belt.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,178
113
Location
NY
Yup, but I quit looking after that one. I would be more persistant, if I needed this info today.:-D
 

goldneagle

Well-known member
4,507
1,002
113
Location
Slidell, LA
Yup, but I quit looking after that one. I would be more persistant, if I needed this info today.:-D
OK here are all the fan belt numbers for the M939 series trucks: (On some you can actually get away with one size larger or smaller in length)

ALTERNATOR= NAPA 25 7480 (need 2)

POWER STEERING= NAPA 25 9480 (need 2)

WATER PUMP= NAPA 25 22425 (need 1)

FAN BELT= NAPA 25 28492 (need 2)

COOLANT BASE= 4019

COOLANT FILTER= 4072

CANISTER OIL FILTER= 1954

Maybe the moderators can post these numbers as a STICKY...
 

ke5eua

Well-known member
2,568
41
48
Location
Baton Rouge (Central), LA
OK here are all the fan belt numbers for the M939 series trucks: (On some you can actually get away with one size larger or smaller in length)

ALTERNATOR= NAPA 25 7480 (need 2)

POWER STEERING= NAPA 25 9480 (need 2)

WATER PUMP= NAPA 25 22425 (need 1)

FAN BELT= NAPA 25 28492 (need 2)

COOLANT BASE= 4019

COOLANT FILTER= 4072

CANISTER OIL FILTER= 1954

Maybe the moderators can post these numbers as a STICKY...

Golden, is this for the non-turbo 250? Looks like I will be doing a recovery at Camp Dodge and if I can't get a good deal on shipping it I will drive it to Baton Rouge (Zachary) with my wife following in the Prius. I already know it's missing the gen belt and I would rather just get all the belts in case. Truck in question is a 932.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks