Whiterabbit
Member
- 744
- 14
- 18
- Location
- Bristol Va.
If anyone needs military lantern parts let me know. I have alot of the small parts, glass and wrenches. I can look n see if I have what you need to fix yours.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Official 2014 SS Ga. Rally buy/sell/trade thread
- Thread starter clinto
- Start date
- 2,891
- 1,516
- 113
- Location
- Czech Republic
OK, technical post.
I worked my butt off the last few weeks (good "getting into shape" exercises) helping to get the workshop of our son reorganized. Once ready and secured, he can work on his larger projects and I can store the M51 there and finally start working on it. Its almost ready and maybe before I depart I will have to do some work with the M51A2 there as well, but no way in either Divine or anti-Divine space will I be able to get the truck on blocks and start pulling stuff to look how good or bad it is.
So at the Rally, I have to figure out what I really need and then balance $$ and weight and repair priorities. I will put up the bare list at the buy/sell thread, but give the full version here as some reading stuff and would like some feedback.
1) Steering. See thread on this. Servo pump is OK, left turning also but right turning takes a lot of strength and feels like a washboard even after cleaning and redoing the control valve assembly. New bearings and maybe better cogwheels?
2) Brakes. I am going to pull at least the front brake drums to check out and redo the cylinders, probably all of them. Do I need new seals and/or bearings or is just packing enough?
3) Brakes II: making the dual system. The rally is an ideal place to pick up stuff to realize this. Main items needed are the second air pack (already in process) and a second MC OR a modern dual MC. Anybody a defensible (as in specification details why etc) idea which make of modern dual MC could fulfill this role
4) Engine Kill goes very hard, rod does not want to go out, once out does not springs back. I already broke the original cable. Standard cleaning/de-rusting job or known problem?
5) Air hammer and wheel nut sockets. I got a heavy duty air hammer with I think a 3/4 tip. Do air hammer sockets exist for the 5-ton M5x series tires? Especially the square one for the inner nut? If not, I need a wheel nut wrench and just cut it up and weld the parts to a suitable adapter.
Undoubtedly I will think of other problems, lets start with this. Thanks.
I worked my butt off the last few weeks (good "getting into shape" exercises) helping to get the workshop of our son reorganized. Once ready and secured, he can work on his larger projects and I can store the M51 there and finally start working on it. Its almost ready and maybe before I depart I will have to do some work with the M51A2 there as well, but no way in either Divine or anti-Divine space will I be able to get the truck on blocks and start pulling stuff to look how good or bad it is.
So at the Rally, I have to figure out what I really need and then balance $$ and weight and repair priorities. I will put up the bare list at the buy/sell thread, but give the full version here as some reading stuff and would like some feedback.
1) Steering. See thread on this. Servo pump is OK, left turning also but right turning takes a lot of strength and feels like a washboard even after cleaning and redoing the control valve assembly. New bearings and maybe better cogwheels?
2) Brakes. I am going to pull at least the front brake drums to check out and redo the cylinders, probably all of them. Do I need new seals and/or bearings or is just packing enough?
3) Brakes II: making the dual system. The rally is an ideal place to pick up stuff to realize this. Main items needed are the second air pack (already in process) and a second MC OR a modern dual MC. Anybody a defensible (as in specification details why etc) idea which make of modern dual MC could fulfill this role
4) Engine Kill goes very hard, rod does not want to go out, once out does not springs back. I already broke the original cable. Standard cleaning/de-rusting job or known problem?
5) Air hammer and wheel nut sockets. I got a heavy duty air hammer with I think a 3/4 tip. Do air hammer sockets exist for the 5-ton M5x series tires? Especially the square one for the inner nut? If not, I need a wheel nut wrench and just cut it up and weld the parts to a suitable adapter.
Undoubtedly I will think of other problems, lets start with this. Thanks.
- 2,891
- 1,516
- 113
- Location
- Czech Republic
At the Rally, I have to figure out what I really need to restore our M51A2 and then balance $$ and weight and repair priorities. I have a 50 lbs limit, everything over costs me $150.
What I would like is mentioned below. Please understand that I cannot take firm decisions yet as per the above mentioned reasons. I will update the list as I think of more I need.
1) engine kill cable 5-ton multi-fuel (just to keep it historically correct).
2) second MC
3) second airpack. Offers under consideration but I am still doubting between using a used one directly, redoing an old one or buying a new one. The outcome depends very much on how much I have to spend on the other goodies I need.
4) cogwheels, bearings, other stuff to repair the steering.
5) canvas cargo tarp for an M51 dump truck (price and weight probably will be prohibiting)
Are there professional vendors at the rally who sell things like brake revision sets, fan belts, bearings, etc, or does that have to be ordered as well?
What I would like is mentioned below. Please understand that I cannot take firm decisions yet as per the above mentioned reasons. I will update the list as I think of more I need.
1) engine kill cable 5-ton multi-fuel (just to keep it historically correct).
2) second MC
3) second airpack. Offers under consideration but I am still doubting between using a used one directly, redoing an old one or buying a new one. The outcome depends very much on how much I have to spend on the other goodies I need.
4) cogwheels, bearings, other stuff to repair the steering.
5) canvas cargo tarp for an M51 dump truck (price and weight probably will be prohibiting)
Are there professional vendors at the rally who sell things like brake revision sets, fan belts, bearings, etc, or does that have to be ordered as well?
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
If anyone has the vinyl coated M-2 50cal covers I could use 3 (maybe more) if they aren't priced at gold value.
- 2,731
- 856
- 113
- Location
- Oakwood, Ga
Are you bringing my KC-18 so I can pickup at the Rally
I dont need the engine fixed, we will fix that.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
Ummm...I don't think she will make it...but ya never know!!Are you bringing my KC-18 so I can pickup at the Rally
amgeneral72
Active member
- 487
- 124
- 43
- Location
- HOLLY SPRINGS GA
Papabear you might be in luck. I believe I threw a few vinyl 50 covers in the semi trailer. My wife has the list so Ill have to get back with you on how many and how much.
mdmorganwife
Member
- 415
- 14
- 18
- Location
- Forsyth Ga
We will have lots of goodies for sale. To much to list. We'll have an M105a2 for sale, with front, side and rear rack with cover. It has led lights. Perfect to load all the treasures you find at the rally. Everything will be priced to sell.
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
I'm bringing a whiffle tree with pins if anyone needs one. Excellent condition.
- 1,704
- 409
- 83
- Location
- Leavenworth, KS
Some of the random stuff I need to part with.
I'll have a box of misc parts including:
NOS deuce intake cap
Nice tail light guts
A couple used incandescent tail lights
A couple front marker lights
Various deuce gauges
Misc hardware
Complete functional field safe with combination $250
New 100ft roll of 5/16" EDPM rubber cord (super rope) $70
2 x PVS-14 ammo cans (tall .50) $20 each
NOS Metal USGI toolbox $25
Unmarked US type red metal jerry can $15
Peltor Comtac headset with case $75
Military type Panasonic CF-19 toughbook convertible tablet/laptop with a bunch of extras $600
Maxabeam handheld rechargeable spotlight deluxe kit $400
I'll have a box of misc parts including:
NOS deuce intake cap
Nice tail light guts
A couple used incandescent tail lights
A couple front marker lights
Various deuce gauges
Misc hardware
Complete functional field safe with combination $250
New 100ft roll of 5/16" EDPM rubber cord (super rope) $70
2 x PVS-14 ammo cans (tall .50) $20 each
NOS Metal USGI toolbox $25
Unmarked US type red metal jerry can $15
Peltor Comtac headset with case $75
Military type Panasonic CF-19 toughbook convertible tablet/laptop with a bunch of extras $600
Maxabeam handheld rechargeable spotlight deluxe kit $400
Last edited:
Jeepsinker
Well-known member
- 5,399
- 456
- 83
- Location
- Dry Creek, Louisiana
What does your maxabeam kit consist of?
hardimpact
New member
- 76
- 0
- 0
- Location
- Powder Springs, Georgia
I was moving around my trailer today and had it turned a little too sharp, bent the overflow bowl and cap on the top of the surge brake. Anybody have one? I will be arriving Friday afternoon/evening.
Thanks,
Scott
Thanks,
Scott
Where Is the link to the specifics for this meet please, like WHOWHATWHENWHERE Exactly please?
HERE http://www.steelsoldiers.com/showthread.php?126876-Official-2014-SS-Georgia-Rally-Info-SSGR14-thread
HERE http://www.steelsoldiers.com/showthread.php?126876-Official-2014-SS-Georgia-Rally-Info-SSGR14-thread
Last edited by a moderator:
vinny-socom1
New member
- 1,360
- 4
- 0
- Location
- Ocala, Florida
hardimpact
New member
- 76
- 0
- 0
- Location
- Powder Springs, Georgia
Official-2014-SS-Georgia-Rally-Info-SSGR14-thread
not sure how to link but look for this post http://www.steelsoldiers.com/showthread.php?126876-Official-2014-SS-Georgia-Rally-Info-SSGR14-thread
Last edited by a moderator:
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
I will take any of the tent stoves you have left.
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
I may be able to help you out.
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
Ill take a set of IR lights.
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
I have one I will bring down for you.