2015 April 17-19th Denton NC Buy/Sell/Trade thread

[wilfreeman]

Okay, we are 7 weeks out on the 2015 Denton NC show/rally. If you have anything for sale or trade, post it up on this thread. Of course, remember that there are no live weapons to be sold or traded.I would prefer that ammo sales not even be mentioned - keep it to yourselves if you are going to do it.

 

[wilfreeman]

I'll start it off

- I have 11 (I think) 9.00x20 NDCC tires off my deuce. I think 5 are on rims - I will check later on today. 9 of them have good tread and no heavy cracking. I will take $10/ea for the tires/tubes/flaps and $25/ea for the ones with rims. I will sell ALL of them for $150, but you have to take ALL of them including the low tread ones. (SOLD)

I am looking for a tan deuce cover and bows. Maybe we could do a partial trade?

If my prices don't appeal to you, feel free to make an offer.















- I also have 2 deuce side glass windows - 1 is NOS with the frame painted black. $50/ea




- I have NOS (in the box) side window bottom tracks. $25/pr




- I have 2 front deuce windshields. Both are a little rusty, but useable. 1 has broken glass. $25/pr (spoken for)




- 2 new windshield rubber from Eriks. $25/pr




- Rear deuce brake hoses. $30/pr




- NOS front M38a1 springs. A little rough looking, but still NOS. 1 has what is left of the factory toe tag. $100/ea



- I have a pair of working plastic deuce wiper motors, arms, new blades and piping. $50
- Have a decent M101a2 trailer with bows. Needs paint. A few rusty seams, but no rust through on it. Pick up in Richburg, SC only - not bringing to Denton. $800
- 1954 Farmall Cub. Fully restored 8 yrs ago, parked in garage and hasn't been moved since. $3,000. Pickup only
- M100 trailer chassis (running gear and frame - no tub). $500

 

[Coffey1]

I have a ac kit I would like to trade.

 

[Andyrv6av8r]

I have 3 Haldex Drier assemblies for sale. One is from a 2012 overhaul truck, one from a 2008 overhaul and one from an unknown year. $30 each. I switched to the MRAP versions.

I also have a 923 driver's seat assembly, no base, excellent condition, $40.

 

[michigandon]

Since I have a gut feeling that I am going do be driving wheelspinners M923a2 to the rally , I am hoping he won't mind if I pull my M105/S250 combo down with it. In which case, it will be on the grounds for sale for all to check out. The only stipulation would be that I wanna crash in it over the weekend. Then it'll be yours to take home Sunday afternoon IF you're a serious buyer. More info on it can be seen here: http://www.steelsoldiers.com/showth...stern-Tank-M105a2-w-Gichner-S250-shelter-1500

 

[MDSA]

For sale

M37 parts.
Hood. 50
Grill/headlight guards. 25 for all 3
Radiator. 150
Front shackles/mount 25 each
Hood sides. 25 each
Rear bumpers. 25 each
LU4 winch (2), PTO, driveshaft 1250. 1 needs rebuilding, 1 is in parts
100 amp alternator, regulator. 150
Transfer case. 250
Miscellaneous M37 parts - ask

.50 caliber gun case. 200
Snatch blocks. Single 65
Double. 125
Heavy 15' cables. 20
Jerry can holders. 20.
M200A1 tongue jacks. 15
Antenna mounts. 10
Helicopter hand winch. 50
Air tanks. 5
Taillights - 10 metal, 5 plastic
Old style taillights. 10
Trailer pigtails. 30
Miscellaneous trailer air hoses.
Reflectors.
Lug and bud nuts.
Bridge plate numbers, subdued 1
1/2 slave cable end. 5
Arctic grill covers 25
Shackles 6"x9", 1 1/2" threaded pin 35
Tow bars, medium, axle clamps 25/pair
Just tow bar. 150
Tow bar with 1" pins. 175
Tow bar with 1" feet, 1" pins 250

Pioneer tool trailer - no title. 1000

CCKW axles, front and rear. 500 both
CCKW transmission. 150
- PTO. 100

M101 parts
sides, front but no rear gates. 75
Bows, metal. 75
Tailgate chain and latch. 10 both
Whale tail parking brake handles

Civilian
'96 Malibu space saver spare, jack kit. 20
'87 ford 2" receiver hitch. 50
Wheeled trailer tongue jack. 10
'99 Ranger nerf steps. 75 both,
ONE yellow metal car ramp - free

 

[Ford Mechanic]

I have a pair of 923 inner fenders, both the same side. Free to anyone who wants them. I can bring them to the rally.

 

[wheelspinner]

Since I have a gut feeling that I am going do be driving wheelspinners M923a2 to the rally , I am hoping he won't mind if I pull my M105/S250 combo down with it. In which case, it will be on the grounds for sale for all to check out. The only stipulation would be that I wanna crash in it over the weekend. Then it'll be yours to take home Sunday afternoon IF you're a serious buyer. More info on it can be seen here: http://www.steelsoldiers.com/showth...stern-Tank-M105a2-w-Gichner-S250-shelter-1500

I'm hoping to come get it, but we'll see. Hook it up. We'll get it there either way. Just haven't had the time.

 

[michigandon]

I'm hoping to come get it, but we'll see. Hook it up. We'll get it there either way. Just haven't had the time.

Actually, it's already hooked up. I needed to shuffle a few things around the yard.

 

[PowerstrokeNC]

I am looking for some snatch blocks. The double and single versions that are used on the rear of M936. Also have a laundry list of LMTV bits needed....

 

[PowerstrokeNC]

LMTV stuff....

1) The panel/kickplate on passenger side that goes below the fuse panel cover. Its in front of the passengers feet and covers the CTIS valve.
2) Window winder/regulator driver side.
3) Window winder handle x 3
4) Interior door latch to open door x2.
5) Heater panel one that has the little black vents and pull knobs.
6) Heater guard, metal one that protects vents/knobs from being kicked by gunner.
7) Driver side door panel cover.

Thanks.

 

[PowerstrokeNC]

A few more... LMTV door hinges

 

[bigugh20]

I'll take the axle clamps MDSA.

 

[MDSA]

Bigugh20,

Ok, Gotcha for two axle clamps. Thank you

 

[CBR Metalworks]

I have a bunch of stuff, really too much to list. I'd about say we should do a convoy to my house and people can pick/choose because I have a couple containers full of stuff.

If anyone needs HMMWV parts (little stuff) I have quite a bit, just let me know what you are looking for.

I will be bringing a M105 trailer FULL of stuff to try and sell, some of what is listed in the link below I will have there, some I will not. If there is something you want please verify so I can bring it. I may require down payment up front if it is large or heavy.

I will sell the M105 (nice, no rust, cover included) for $550 AFTER the weekend is over. That is exactly what I paid for it, not counting my time/fuel to go get it.

Here is a link to stuff I have, I will continue to list more in this link.



Air driers (almost a direct swap onto 5-tons--just drill three holes) $100 each, I am bringing about 8 of them. If you want to be guaranteed to get one better get it quick, that is cheaper than you can rebuild the drier on your 5-ton.

Jack plates, slave cables, air hoses, HMMWV brake master cylinders, Tow bar axle clamps, etc etc etc, literally too much to list. CLICK EACH PICTURE FOR PRICE AND DESCRIPTION!

https://plus.google.com/photos/1001...s/6112428773916236961?authkey=CPjQ-rzD6e7tmgE

 

[Ford Mechanic]

CBR put me down for one of those air driers.
Thanks

 

[Coffey1]

Ford I'll be happy to take the inner fenders.

 

[CBR Metalworks]

Ford--OK.

Coffey1 I think you had PM'd me, you still want one of the air driers as well?

I want to bring some for those that say they want one, but I want to have about 6 extras for those that may decide it is too good of a deal to pass up!

 

[Coffey1]

Yes CBR I want a drier.

 

[Ford Mechanic]

Ford I'll be happy to take the inner fenders.

10-4 will do.