• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M1078A1 -10 Technical Manual

D

Dave21

Member
31
2
8
Location
Las Vegas NV
Third From Texas said:
And I did a search for the C7 as well and it does list later serial number block that had them up to the release of the manual.

So I stand corrected there...
Click to expand...
[FONT=&quot]
That's great I have a 2007 M1078A1R bought it was 1700 miles on it and drove it out to Las Vegas from Pennsylvania . no issues[/FONT]
 
coachgeo

coachgeo

Well-known member
5,150
3,466
113
Location
North of Cincy OH
fuzzytoaster said:
Can you list the actual TM #? I have an ETM but it doesn't go into much detail on the C7 despite it referencing it in some sections.
Click to expand...
Believe where the confusion is.. What you discovered.. It has smattering of C7 in it but not really much so it covers it... But doesn't. Believe that is all we have so far.

C7 is in many commercial rigs though so about any manual for a truck with a C7 should do you fine
 
fuzzytoaster

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,319
3,212
113
Location
Fort Worth, Texas
coachgeo said:
Believe where the confusion is.. What you discovered.. It has smattering of C7 in it but not really much so it covers it... But doesn't. Believe that is all we have so far.

C7 is in many commercial rigs though so about any manual for a truck with a C7 should do you fine
Click to expand...
Third From Texas said:
Here's the TM number as well as the .pdf file name the ETM is reading.
As Geo said, there is just enough to wet your whistle but I'd not use it as a source for engine specifics:



View attachment 783244
Click to expand...
The C7 engine doesn't concern me as much as the electronics in the module based PDP in those trucks. I too have that TM and the 10-1 & 10-2 for the MTVs which mainly cover the 3126 and motherboard based PDP. They all are limited on the trouble shooting for the new style PDP. aua
 

Attachments

Third From Texas

Third From Texas

Well-known member
2,777
6,529
113
Location
Corpus Christi Texas
L

Lugnuts

Active member
Steel Soldiers Supporter
329
243
43
Location
Myakka City, FL
NDT said:
You are THE BEST! See if you can upload it to the TM section of this site. I will buy a copy if you burn it on a CD or memory stick. Try to get the other -20 as well.
Click to expand...
Definitely be interested in what you have. You'll be my new best friend! LOL
 
R

Ronmar

Well-known member
3,896
7,563
113
Location
Port angeles wa
In the end having seen both A1 and A1R schematics, the A1 and A1R are not all that different electrically. The biggest visual difference is that they went from the sometimes problematic circuit card type PDP to the off the shelf sealed relay modules. The relays contained within are basically the same and service the same circuits. They also somewhere in the end of the A1 shifted to the integrated gauge module and bussed gauges, so sadly if your gremlin are gauge related, it may require a whole controller vis a single gauge to fix… Not so visible is the 260A alt on the A1R which I am sure cuts down on battery and charge related issues…

The early A1 schematic is available here…
 
R

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
Ronmar said:
In the end having seen both A1 and A1R schematics, the A1 and A1R are not all that different electrically. The biggest visual difference is that they went from the sometimes problematic circuit card type PDP to the off the shelf sealed relay modules. The relays contained within are basically the same and service the same circuits. They also somewhere in the end of the A1 shifted to the integrated gauge module and bussed gauges, so sadly if your gremlin are gauge related, it may require a whole controller vis a single gauge to fix… Not so visible is the 260A alt on the A1R which I am sure cuts down on battery and charge related issues…

The early A1 schematic is available here…
Click to expand...
Was there a link or file to this post?


Sent from my iPhone using Tapatalk
 
R

ramdough

Well-known member
1,554
1,729
113
Location
Austin, Texas
Ronmar said:
To the A1 schematic? Here was referring to here on the SS website… At the top of the SS home page in the schematics section, select “Present Conflict Vehicles”. The A1 schematic is at the bottom of page 1… Here is a link…

Click to expand...
I already had that one. I thought you had the entire A1 TM in a pdf format.


Thanks for posting the link anyway.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
111,237members
165,506threads
2,329,164posts
880online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks