• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

1984 CUCV M1009 build thread

Mohawk Dave

Member
226
14
18
Location
CA
UPDATED 3/5/11 ON PG 2 W/ PHOTOS.
UPDATED 3/9/11 ON PG 3 W/ PHOTOS.
UPDATED 3/21/11 ON PG 6 W/ PHOTOS.
UPDATED 6/15/11 ON PG 6 AND PG 7 W/ PHOTOS.
UPDATED 6/17/11 ON PG 8 W/ PHOTOS.
UPDATED 6/20/11 ON PG 9 W/ PHOTOS.
UPDATED 7/14/11 ON PG 11 W/ PHOTOS.
UPDATED 9/26/11 ON PG 12 W/ PHOTOS.

1984 CUCV M1009
Former U.S. Navy Seabee @ Port Hueneme, CA
6.2 diesel
Turbo 400
np-208 (soon to be swapped with np-205)
10B/3.08 (soon to be swapped with D60/14 4.56 w/ Eaton Gov-Lok and LS)
28k miles

So I found this on Monday, 2/14/11, bought it 2/15/11 and brought it home. We were racing Battle at Primm on 2/19-20/11, so I only had a few days to bring it up to speed.

The Government had drained all fluids, oil filter missing, rear diff cover missing, hole punched in tranny pan, fuel tank skid plate had hole torched in it, hole punced in fuel tank, alternator regulators going haywire, but other than that she was beautiful-(to me).

I bought 37 HMMWV tires when i bought the M1009, but since I did not have the D60/14B in yet, i had to get 6 lug wheels.

Anyways, got it home Tuesday night and went to work. Here are some photos. Hope you enjoy. Thanks.
 

Attachments

Last edited:

pacebm

Member
140
0
16
Location
Brewton, Alabama
Nice build and a lot of work. I see that you trimmed the fenders to fit the 37's. Are you planning a lift?
I bet hills are rough with the M1009 gearing!
 
Last edited:

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
Hehe, did you already install the 205 or is that a future mod? Looks like the same guy that worked on the steering column got to the front fenders! LOL
 

jw4x4

Active member
1,082
5
38
Location
Dayton, Ohio
The steering column looks like it was "peeled" in order ot steal the vehicle. Somebody was not smart enough to acquire a B 73Y2. Then again, nobody ever accused a thief of being smart.
 

Mohawk Dave

Member
226
14
18
Location
CA
pacebm- no lift planned, possibly a set of deavers and some Fox 2.5s. And yes! the hills are killers. I just drove it out to Primm and the hills by Stateline caused top speed of 40 mph. Can't wait to get the 4.56s and turbo.

Cucvfreek- I live near Beaumont. About 7 hours south of you.

Recovry4x4 - 205 was a typo, I have the 208, but yes, the 205 will go in when i swap the axles from the M1028. IDK what happened to the column, but we plasma cut the fenders. I need to clean them up and finish, but we were under the gun trying to get to Primm
Thanks for all the compliments guys.
 
270
5
0
Location
akron, ohio
1984 cucv m1009 build thread

Hey Cucvfreek, must be nice to be out in that area... i did 6mos. in Tarzana, and then 3 1/2 yrs in Simi Valley, about 2mins drive from my house to Spawn Ranch on Santa Susanna Pass... loved it out there, and should have never come back to SLOhio... sadly, i didnt have any MV's when i was out there, but did have my ex-gov't 92 Bronco (5.8Ltr, 4.11's, HD susp., and factory rollbar), and spent alot of time at Hungry Valley and the Mojave, both wheelin and riding mx... there was a guy in the hills above Simi that had a nice Deuce... heres a pic i took back in 04 of it. not a Cucv, but i still would love to have had it.
 

Attachments

Last edited:
270
5
0
Location
akron, ohio
sorry, almost forgot, nice ride, Mohawk !! and thanks for putting the link to the built M1009 up on the other thread... are you building your front bumper to hold a winch? id love to see pics, whether you go W/W, or WO/W. and i think it looks bada$$ with those tires and no lift... i dont want to cut my M1010's fender, but have considered getting flared glass Prerunner fenders for it, to minimize the needed lift to go to 37s. plus they just make anything they're put on look even cooler.
 

Mohawk Dave

Member
226
14
18
Location
CA
hey Still, Thanks!

if you want fiberglass you can check out Trailer Products at </title><link href="styles/style2.css" rel="stylesheet" type="text/css" /></head><body><div id="container"><div id="masthead"><img alt="" height="97" src="photo/logoshop.gif" width="270" /> <title>

or Hanneman at Hannemann Fiberglass Inc.

I will put a winch in my bumper, warn 8274 probably. It will be a couple weeks until we do the bumpers. Starting the cage on Tuesday.

We build and race trucks, but have just recently been getting into 4x4 stuff, and we love it. We are all getting Jeeps, Broncos,etc for our multi-purpose-go anywhere-do anything vehicles.

I cut my fenders b/c we live by the motto FORM FOLLOWS FUNCTION but I understand not everyone wants cut fenders. lol.

Here's 2 of our trucks. The tundra is what took 1st in 1450 and 2nd in Heavy Metal last weekend at Battle of Primm.

-Dave
 

Attachments

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
I cut my fenders b/c we live by the motto FORM FOLLOWS FUNCTION but I understand not everyone wants cut fenders. lol.


-Dave
Don't worry about that. You bought it, build it as you like. If folks here dont like it they can pound sand.
 
270
5
0
Location
akron, ohio
i miss going fast in the desert... its one of the main things that made me want to go to cali as a kid. never got to go that fast, but my old boss out there had raced desert for years. in fact his dad and Bud Ekin? basically started the Baja 1000 as a promo run for Honda motorcycles... one day i'll be back out there... hope to see King of the Hammers some time...
 

Mohawk Dave

Member
226
14
18
Location
CA
Freek, yes, BITD, MDR, SCORE, SNORE, and any others our pockets allow.

So, we started the cage Tuesday, here's progress so far. We're just bolting to the cab as this is NOT a race vehicle and will NOT see high speeds. As it gets 20 MPG, i will DD it a lot. I did not want road noise and diesel noise harmonics throught the cage making it stupid noisy. This cage is for cab reinforcement for a flop over when rock climbing or what not. The girls are always in the back and i did not want their skulls smashed through the fiberglass top.

After we finish the cage, I will mount/install the new


XRC seats
Amazon.com: Smittybilt 750115 XRC Black and Black Passenger Seat: Automotive

seat sliders Amazon.com: Bestop 51255-01 Black Single Seat Slider: Automotive

GEAR seat covers Amazon.com: Smittybilt 5661024 GEAR Tan Front Seat Cover: Automotive

rear seat cover, which will need to be extended 14" Amazon.com: Smittybilt 5660224 GEAR Tan Rear Seat Cover: Automotive

CB Amazon.com: Uniden PRO538W 40-Channel CB Radio: Electronics

Am/FM Mech-less with IPOD Amazon.com: Sony DSXS100 Digital Media Receiver: Electronics

Marine housing Amazon.com: Jensen Marine MGH300 Waterproof Gimble Mount Stereo Housing: Sports & Outdoors

MTX marine components Amazon.com: MTX TM6001 6.5" 2-Way Component Marine Speakers: Electronics

multi use charger Amazon.com: Multi-Use Vehicle Charger with Dual USB Ports and Dual 12 Volt Sockets - Magnadyne: Cell Phones & Accessories

GPS/Chartplotter Amazon.com: Garmin GPSMAP 640 Waterproof Car/Marine GPS and Chartplotter (With BlueChart g2 Marine Charts and City Navigator NT North America Maps): Electronics

2 fuse blocks, (1 switched) Amazon.com: 5026 ST Blade Fuse Block w/ Cover: Sports & Outdoors

wink mirror Amazon.com: Wink 5 Panel Panoramic Mirror: Automotive

grab handles for passengers Amazon.com: Smittybilt 769310 Extreme Black Sport Handle: Automotive

several Fire ext. holders Amazon.com: Rugged Ridge 63305.21 Black ATV/UTV Fire Extinguisher Holder: Automotive

dash mat for now Amazon.com: DashMat Dash Board Cover, Caramel: Automotive

dome lights Amazon.com: Hella 959073001 9073 Series 12V White Light LED 1x10 Interior Strip Lamp with Clear Lens: Automotive

vinyl kit AutoCustomCarpets Passenger Area Carpet Kit Vinyl=


So, I need to keep on trucking. Then we will also do the roof rack with a rooftop tent, rear bumper w/ MM hyd. winch, spare 37, 2 jerry can diesel, 1 jerry can water, hi lift, and whatever else fits. lol

Front bumper will be with MM hyd. winch. I will keep all blackout lights in working condition and try to follow the MV look. Also, i will stencil the markings back on the body.

Enjoy.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks