28MT replacement starter

[84cucv1ton]

this one:
New Starter Military Equipment CUCV 6.2 Diesel 24 Volt | eBay



anyone have this? after 11 years the starter in my m1009 went.. being told this is the replacement. good one or should i look else where? thanks

 

[Chief_919]

I have one on my truck.

It is Chinese. Works ok, but I ponied up the $$$ for a rebuilt GM gear reduction unit and will be swapping it out soon. Side by side you can tell the quality difference.

But mine is working so far.

 

[84cucv1ton]

rebuilt GM gear reduction unit any chance you have a link?

 

[southdave]

I got 6 or 7 from gl rebuilt them and I love it. Mine are delc remey out of humvee and are built in Brazil go figure spins allitle faster then the stock one I swaped out.. if you it, it has different hanger for the rear that gm still stocks.. the mt27 is the 12volt starter
Also the starter is used in JD farm and construction equipment and some CAT crap
if

 

[Warthog]

You have been around long enough to know that no active auctions, including fleebay are to be posted...


Just make sure you change the support bracket and install new bolts.

 

[Dave Kay]

How about this guy: NEW 24V STARTER MiLITARY VEHICLES 6.2L DIESEL ENGINE

Anyone buy his starters?

 

[dstang97]

Get yours rebuilt, too many horror stories with no name Chinese stuff.

 

[GM72K10]

Get yours rebuilt, too many horror stories with no name Chinese stuff.

Amen, go to a good starter and alternator rebuilder and get the original rebuilt.

 

[DrJekl]

I used one of those Chinese starters and it works great. Comes with a year warranty.

 

[Dave Kay]

Ok then, so I guess the question needs to be asked; who or which vendor DOES NOT sell Chinese junk? AC-Delco stuff is re-maned, overseas, and arounf $200 a pop. And it looks to be impossible to get NEW Made in the USA units, so where do us CUCV guys go for a quality starters?

I for one DO NOT trust most rebuilders of anything anymore--- no apologies--- experience is the best teacher. So, rebuild them ourselves? How about the solenoids? where can a guy get a decent one NOT made in China?

Guess I'm asking a lot here ain't I~~~!!!!

 

[4x4 Forever]

How about this guy: NEW 24V STARTER MiLITARY VEHICLES 6.2L DIESEL ENGINE

Anyone buy his starters?

I have one in my m1008 for the past 2 months. Went with this as my rebuilder wanted 300+clams!!! for the reduction Delco unit.

 

[Matt65]

I got one from DBElectric on Ebay. Very pleased with them. Starter works great, far better than the direct drive piece it replaced.

 

[indy4x4fab]

for us12 volt guys any body tried these out by the same company?

NEW CHEVY 6.2 & 6.5 DIESEL STARTER MOTOR HD HT

getting ready to need two of them very shortly.

 

[southdave]

try K&N electric out of Cincinnati they have them around 119 I belive new, thats with a discount...

 

[SSG Rock]

The gear reduction starter requires a different bracket, try to get one befor installing this type starter, also check clearence between flywheel and starter drive,

 

[southdave]

The gear reduction starter requires a different bracket, try to get one befor installing this type starter, also check clearence between flywheel and starter drive,

I had to swap the flywheelwiththe 700r4 swap I didn't noticed anything..

 

[M1008driver]

I used these guys. It has a two year warranty and I figured it is better than chinese, but it cost more. I did not want continued starter problems. They are on EBAY. I also got a Pioneer fly wheel from Autozone. Don't forget to get the new starter brace if you change to a gear vendor...

http://www.cncelectrical.com/powerstrike.html

 

[RedHeadTarn]

I bought one of the cheapo ones from ebay about a year ago and it has worked great. And I am abusing the crap out of it because my check valve on top of my IP is leaking so every morning I have to crank it for 20 or 30 sec to get fuel back up to the pump. I was initially apprehensive but it has been doing great, and at the price I can keep a spare in the garage.

 

[DokWatson]

I got one off ebay for 90$ shipped. It was still in the plastic and was a Delco. Gotta have the gear reduction bracket, I got mine from the Chevy dealership for 15$. It spins way faster and is one of my favorite bolt on mods. I kept the direct drive as a backup just in case though... hard to pull start an automatic 100 miles in the middle of nowhere

 

[Mohawk Dave]

Hey SS,

I am buying a spare starter to keep in the Oh9. Some of you have recommended DB Electrical on EBAY. there 24v Gear Reduction is 90 bucks right now. Says it's new. Is this the good one, or Chinese Junk? Or should I spend $200 from CNC Electrical?

Thanks,

Dave