blackrock
New member
- 331
- 1
- 0
- Location
- Phoenixville,Pa
Black Rock Fab 8" Hanger Relocation Lift Kit PRICE UPDATE ON PAGE 7!!!
[FONT="]Hey guys figured i would start a thread with some info and detailed pics of my lift that i built and installed on my truck that i have been driving for the past few months.
Right now the first kit has been sold to "usmctopgun" (Mike) who has just arrived home from oversees and is doing a great build for a great cause (toys for tots). I feel honored to be apart of it and hope he is happy with his purchase. For Mike i am doing custom front and rear plates which will be shown below soon as i get all the pictures uploaded (this may take some time).
[/FONT]
The kit is cut from all 3/8 plate.
tube slides threw 4 plates of 3/8 steel for support. Tube is 2"OD x.120 wall DOM
steering ram mount
Will have more pictures as i get a chance. Now, i did make reversions to the set going to Mike. The rear set of the front hangers will have the cross brace removable, making a tranny swap easier. Also, the plate that bolts to the bottom portion of the frame for the rear will not have any holes in them allowing customer to choose any wheelbase desired (depending on wheelbase cross member holes can be used).
Thanks Kyle
[FONT="]
[/FONT]
[FONT="]Hey guys figured i would start a thread with some info and detailed pics of my lift that i built and installed on my truck that i have been driving for the past few months.
Right now the first kit has been sold to "usmctopgun" (Mike) who has just arrived home from oversees and is doing a great build for a great cause (toys for tots). I feel honored to be apart of it and hope he is happy with his purchase. For Mike i am doing custom front and rear plates which will be shown below soon as i get all the pictures uploaded (this may take some time).
[/FONT]
The kit is cut from all 3/8 plate.
tube slides threw 4 plates of 3/8 steel for support. Tube is 2"OD x.120 wall DOM
steering ram mount
Will have more pictures as i get a chance. Now, i did make reversions to the set going to Mike. The rear set of the front hangers will have the cross brace removable, making a tranny swap easier. Also, the plate that bolts to the bottom portion of the frame for the rear will not have any holes in them allowing customer to choose any wheelbase desired (depending on wheelbase cross member holes can be used).
Thanks Kyle
[FONT="]
[/FONT]
Last edited: