-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Barrman's latest activity
-
Barrman replied to the thread Power steering bleeding issues.If you are just getting a trickle from the return then either a restriction somewhere or a bad pump might very well be your issue... -
Barrman replied to the thread 2025 TX MV Rally.My M715 has new wheel cylinders which means the brakes now work again. I even got the brake light to function too! Plus a new tube had...
-
Barrman replied to the thread Th400 rebuilt.Having done a TH400 to 4L80E swap in a Suburban I want to point out a few things. You need the 4L80 to be the 4 wheel drive version. You...
-
Barrman replied to the thread 6.2 dies when you let off throttle.As mentioned 13 years ago. Normally the left off and die issue is related to the IP and the idle governor inside the IP. Clean fuel and...
-
Barrman replied to the thread Fitting 40s tires on a M1008.That is the Cowdog. There is a link in my signature to the build thread here on Steel Soldiers. The other link in my signature is to my...
-
Barrman replied to the thread 2025 TX MV Rally.Also, if you haven’t done long drives in the truck before. Just go the speed you and the truck feel happy with. 48 mph is the happy...
-
Barrman replied to the thread 2025 TX MV Rally.OSR will get you real close. Then work your way to Tabor road and you will find us. No shoulder in case of trouble though. How much...
-
Barrman replied to the thread 2025 TX MV Rally.There will be at least one tow bar present. Vehicles have needed a helping hand a few times in the past. All worked out for the best by...
-
Barrman replied to the thread Oil pressure issue.The fitting you broke was for the pipe going to the head on the back of the block, correct? I’m just trying to think of restriction...
-
Barrman replied to the thread M1007 - CUCV Suburban Clone Build Thread.I actually tried to keep the post short. Really. What I didn’t write was the insulation was gone where the wire to the sensor and the...
-
Barrman replied to the thread Heavy white smoke cold start.As I wrote in post #2 of this thread. Oily white smoke is lack of heat. Glow plugs are the heat source until the engine gets running on...
-
Barrman replied to the thread M1007 - CUCV Suburban Clone Build Thread.If you have read this entire thread you know that probably at least 10% of my post are dealing with engine coolant temperatures and...
-
Barrman replied to the thread 2025 TX MV Rally.You still have 4 weeks. Well, less than 4 weeks now. We are gathering in March. 21-23 of March to be specific.