-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mogman's latest activity
-
Mogman replied to the thread Bringing non-runner M1165A1 REV back to life!.The IP is a "distributor" type of pump, while possible it is not very likely it would be able to "fire" some cylinders and not all of... -
Mogman replied to the thread Fixing the 1998 HMMWV.You really do not need to tag the wires, they all have ID tags and there is no guarantee they were connected correctly to begin with...
-
Mogman reacted to FlameRed's post in the thread What have you done to your HMMWV today/lately with
Like.
I often wonder why I subject myself to abuse trying to fix things I don't have a lot of experience fixing? I have been struggling to fix... -
Mogman replied to the thread Fixing the 1998 HMMWV.I have had that happen several times, I find it easier to just drill out the head and when the trans/engine cooler is off there is...
-
Mogman replied to the thread New to me M1114.Of course make sure there is nothing else connected to the "outside" of that stud but for the 1-0 cable to the alt.
-
Mogman replied to the thread New to me M1114.Yes it can, just run a 1-0 cable from the extra stud to the buss bar, also see if you can locate wires 2A and 56B (could be 5A)
-
Mogman replied to the thread New to me M1114.Start by counting the big wires going to the buss bar, you should have one to the starter, one to the alt, one to the slave connector...
-
Mogman replied to the thread New to me M1114.So it looks like there should be a wire going from the buss bar to the 200A alt, it is marked as a 1-0
-
-
Thats not Hmmwv...its for Big Oshkosh trucks
-
Mogman replied to the thread New to me M1114.OK that makes sense, I am the one confused, a snapshot of my life now :oops:
-
Mogman replied to the thread New to me M1114.EDITED to seem like I am coherent I have never had my hands on one but the extra post would make sense, there should be a large cable...
-
Mogman replied to the thread New to me M1114.If your truck had a 400A alt. then you will have two positive cables, one inside the engine harness and one completely independent of...
-
Big thanks to you @Mogman...your diagrams helped me figure it out....much appreciated!
-
Mogman replied to the thread HMMWV M1097R1 specific.Treat it as a M1097A2, the wiring is as stated a little different. If the GVWR is 10K then you have the 10K hubs brakes and half shafts...
-
looking for petroglyphs in the desert. Posting pictures using my starlink mini.
