• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

No-0ne's latest activity

  • N
    No-0ne replied to the thread LMTV FMTV replacement or upgrade air dryers.
    I posted this picture on another related thread where a guy found a similar piece in his air dryer. I made it to Tulsa Ok today and...
    • IMG_4905.jpeg
  • N
    No-0ne replied to the thread M1078 fmtv ctis.
    Hahaha, just my luck, I probably have a defective stem. Well, my tires were holding air when I got up this morning so i got in the...
  • N
    No-0ne reacted to GeneralDisorder's post in the thread M1078 fmtv ctis with Like Like.
    Nope. I've done that hundreds of times and never had an issue. Go get some new cores I guess. Could be a defective valve stem I guess...
  • N
    No-0ne replied to the thread PURest Air Dryer constantly purging/leaking.
    I wanted to post this picture here to see if anyone knows where these pieces of spring are coming from. I’ve been have trouble getting...
    • IMG_4905.jpeg
  • N
    No-0ne replied to the thread M1078 fmtv ctis.
    I tried removing the wheel valves today and putting a valve core in the shrader valve so I could air it up but the valve core wouldn’t...
    • IMG_4901.jpeg
  • N
    No-0ne reacted to Ronmar's post in the thread M1078 fmtv ctis with Like Like.
    If I recall the banjo bolt is an 18MM x 1.5MM pitch(I can confirm that when i get home). That metric pitch actually coincides with a...
  • N
    No-0ne reacted to GeneralDisorder's post in the thread M1078 fmtv ctis with Like Like.
    Not sure on that but I doubt it. There's WAY more part numbers for various wheel valve types than you probably are aware of. The CTIS...
  • N
    No-0ne reacted to GeneralDisorder's post in the thread M1078 fmtv ctis with Like Like.
    You don't need anything to remove the wheel valve except an allen socket for the valve, a crescent wrench for the banjo and a Shrader...
  • N
    No-0ne replied to the thread M1078 fmtv ctis.
    Thanks again! Are those kit links I referenced the right ones?
  • N
    No-0ne reacted to Ronmar's post in the thread M1078 fmtv ctis with Like Like.
    low tire = wheel valve, so you have 3 leaking wheel valves. They may have bad diaphragms, but they may simply be dirty and unable to...
  • N
    No-0ne reacted to GeneralDisorder's post in the thread M1078 fmtv ctis with Like Like.
    You should rebuild the wheel valves - DO NOT buy the Chinese one's from Midwest Military. Only buy genuine Dana/Spicer/Eaton parts...
  • N
    No-0ne replied to the thread M1078 fmtv ctis.
    As far as what’s keeping me from driving, there’s this issue with the CTIS and now I have a Air dryer with the heater unplugged because...
  • N
    No-0ne reacted to GeneralDisorder's post in the thread LMTV FMTV replacement or upgrade air dryers with Like Like.
    I don't like the idea of back-pressuring the 1800 CFM compressor that already likes to eat exhaust valve springs due to high discharge...
  • N
    No-0ne reacted to Ronmar's post in the thread LMTV FMTV replacement or upgrade air dryers with Like Like.
    Our air demand is probably less than some other trucks those are used on, so it should work fine usually a factor of how much leakage...
  • N
    No-0ne reacted to Ronmar's post in the thread M1078 fmtv ctis with Like Like.
    What general said. You will have to remove the elbow fitting on the small hose where it connects to the stem pipe that is bolted to the...
Show older items
112,171members
165,982threads
2,336,795posts
622online users
Top