-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
rickf's latest activity
-
rickf replied to the thread MEP-362A Value.2900.00 plus 13% buyers fee. 3277.00. Still a LOT of money for a 28 volt genset of that size. With an engine that drinks fuel at what I... -
rickf replied to the thread MEP-362A Value.They are selling on the net for 14,000.00. That is one big chunk of change for "a neat engine"!!!
-
rickf replied to the thread 60K spitting out oil from dipstick.That must be quite some operation using that much generation capacity!
-
rickf replied to the thread 60K spitting out oil from dipstick.It's not over full is it?
-
Time keeps ticking and age 80 is a few months away, So I'm giving our house to a family member and their children , but they really...
-
rickf replied to the thread Not quite a generator, but my 803 is part of it soon....I just bought the LiTime batteries for my RV and they seem to be working well. That was why I was curious.
-
rickf replied to the thread Not quite a generator, but my 803 is part of it soon....What brand of batteries did you get?
-
The MEP-002A was called into duty during and after a Historic wind and wildfire breakout in Oklahoma a few days ago. Towns evacuated...
-
rickf reacted to DieselAddict's post in the thread How to wire a power panel right to my mep 803a generator with
Like.
Lugs 1 and 3 are your hots in 240/120v mode. N and G are labeled. If you are using a panel that bonds the neutral and ground together... -
rickf reacted to Light in the Dark's post in the thread MEP802 oil pressure switch wiring with Like.
You will have one unused wire on the switch. Its a multi-tap, can be configured as a NO or a NC switch depending on how its connected...
-
rickf replied to the thread MEP802 oil pressure switch wiring.Were those two cut wires twisted together? I am not all that familiar with that machine but on the 003 and 2 that would be an oil...
-
rickf reacted to Bob USNR's post in the thread Am I a victim of foul play or incompetence? LOL. with Like.
After 50+ years installing those filters I remember the instructions were Oil the gasket and spin on until the gasket touches the seal...
-
rickf reacted to Powerlinefixer's post in the thread Am I a victim of foul play or incompetence? LOL. with Like.
This was confirmed today. I changed the fuel/water separator on the other unit. It spun right off, no issues. The gasket had been oiled.
-
rickf reacted to Scoobyshep's post in the thread Who has reused a MEP generator engine for other equipement? with Like.
You could use the pump to charge an accumulator instead of direct off the pump Sent from my SM-S908U using Tapatalk