-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
@TLW's latest activity
-
@@TLW replied to the thread MEP 802a Will Not Start..Here is the ad for the part I purchased. https://surplus.saintois.com/fr/mep-802a/832-s1-switch-88-22829.html S1 Switch 88-22829...
-
@@TLW replied to the thread MEP 802a Will Not Start..It seems to me that if I have power going into the S1 switch I should be getting power out, unless it's a defective switch. I believe...
-
@@TLW replied to the thread MEP 802a Will Not Start..I saw that info on the generator's side panel but I wasn't sure what 'common' meant. I'm not an electrician: though I have done a...
-
-
@@TLW replied to the thread MEP 802a Will Not Start..The switch is an import from a company in France or Spain. I don't remember which.
-
-
@@TLW replied to the thread MEP 802a Will Not Start..This is a new (to me) machine. (It is a 1997 model.) This machine has very few hours on it, but was stripped for parts. I replaced...
-
-
@@TLW replied to the thread MEP 802a Will Not Start..Yes. I am testing the S1-7 terminal while the switch is in the start position and I am getting no reading on my voltmeter.
-
@I've been working on a MEP 802a and I can't get it to crank from the S1 switch. The engine will crank from the Dead Start Switch. The...
-
@@TLW replied to the thread MEP-802a Parts Question.I've heard that I may need to add a 'fuse mod kit' to my gen set. Is this a necessity?
-
@@TLW replied to the thread MEP-802a Parts Question.You guys have taken this project out of the 'work' category and put it into the 'enjoyable' category. I was slogging away at it, but it...
-
@@TLW replied to the thread MEP-802a Parts Question.Okay. Thank you. Where will I find the parts numbers for each piece?
-
@@TLW replied to the thread MEP-802a Parts Question.Yes. I downloaded them from this site. the wiring table was a tremendous help in replacing the switches. The wires had been snipped and...
-
@@TLW replied to the thread MEP-802a Parts Question.Okay. Thank you very much. It is difficult to replace parts until you know what parts are needed. LOL Any idea where those parts can...
-
@I recently bought a MEP-802a generator at an auction. It has been used for parts and I am trying to replace them. I have never worked on...
-
