M1010 Fuel Filler Parts and Fuel Tank Skid Plate

I am wanting to add a second tank (passenger side) to my M1010 and am looking for the fuel filler pipe, hoses, protection on the inside of the box and the outside door.....also a skid plate and attachment hardware for the second fuel tank.
Anyone have this stuff available?

No one?

I haven’t looked at a M1010 in over a decade. However, wouldn’t the standard Chevy dual tank set up hardware work? Or is something in the way? You will have to get a diesel specific with the return hoses valve to go between the tanks as well.

Barrman said:

I haven’t looked at a M1010 in over a decade. However, wouldn’t the standard Chevy dual tank set up hardware work? Or is something in the way? You will have to get a diesel specific with the return hoses valve to go between the tanks as well.

Click to expand...

I have the tank, valve, switch, mounting brackets already. I’m looking for the unique filler neck, door, cap and inside the box cover to protect the filler/hose and keep water out. Wanting to match the drivers side.

OK. Would filling from the wheel well work?

Barrman said:

OK. Would filling from the wheel well work?

Click to expand...

I think that’s probably the way to go since I haven’t found any factory parts from drivers side.

I sourced a M1009 fuel filler neck and interior cover. Door should be fairly easy to fabricate if I can get the rest in there. I was hoping to put a door right behind the passengers cab door to get into the camper so it’s going to be tight.