Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I'm not sure either....I need a spring lift to have c;clearance for a 12"50:16 X 12:50 X 16:5. I took a leaf from a set up from another 16.5
What do I do to gain the clearance from stock>?.
On the front spring plate, there is a nut inboard but can't drive it through. Does it have a spring clip that has to be removed first?
The nut is off but not having much success on removing the bolt from the plate.
I will have to check mine...probably the same condition as yours were. I have added a leaf spring in the mean time but may get some more lift from the body mounts.
I looked at a set of leaf springs not mounted on a truck. They look fairly flat...maybe 1 - 2" of rise from middle to each end. Is that about what you would expect
or should there be more? These haven't been used much...the sticker is still on them.
My front leafs are 3 in total. How do you add a leaf to that and what position on the springs would it be placed? The longest is 4'.
Are you suggesting using body lift rubbers instead of leafs to lift it up from rubbing?
The rubbing is occurring mostly on driver front tire.
It does seem the...
The rub is happening when I turn the front tires. I notice yesterday there are vertical cuts in the fronts. There isn't a lot of clearance when they touch the fenders while turning.
Hi All, a week or so ago I put some run flat 36 X 12:50 X 16.5 Hummer tires on my stock '76' M 880. I also put 2"
spacers on all four axle lug nuts.
My rear tires don't rub but my front do...need more clearance. Would an additional spring on the front pick the body up
enough to prevent...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!