Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Anything budd pattern. Which means tapered lug nuts will have Left hand and right hand thread. This is not the same on hub pilot wheels such as the MRAP wheels. Hub pilot are easy identified by a lug nut with a washer behind it.
The Battery lasts a long time. I have a charger for the cigarette lighter that dewalt makes as well.
The 20v i do like though since with the flex volt battery you can use a variety of tools. I keep the grease gun and the angle grinder on board as well. With a good 7inch disc the battery will...
If you do not add additional air tanks then your 1 inch impact is going to be limited to 1 lug nut every minute or two. I ditched air impacts a while ago as on onboard carry around tool. Lots of room with only 1 purpose.
The Milwaukee 18v fuel series 1/2" guns and the Dewalt 20v guns will do...
I've seen the new composite runflats that were bent and damaged. Probably from a heavy HEMTT wrecker or CAT III mrap. The rubber runflats should be discarded after usage on a flat.
I will let you rookies in on a little secret. Beadlocks can fail and a tire can come off the bead. Especially the strap type hutchinson beadlocks. Some of the bolts that were used with the straps especially on early production ones were not fitted with stainless steel bolts. or the Motor...
These straps are are rated at 44.5tons. Only drawback is that they were only 12ft long but for $90 they are pretty useful and strong.
https://youtu.be/hTFNyOjVlFg
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!