Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have a M101A2 for which I have already purchased 1156 and 67 12volt bulbs, 2 replacement light housings and a trailer side round 7 pin pigtail that will connect to my Tacoma. Also got the appropriate terminals that match the trailer wiring so I can connect the 7 pin cable to the trailer wiring...
I have a 1990 Kasel M101A2 3/4 Ton trailer with 8 lug wheels. I will be looking to replace these wheels soon but I don't know how to identify them beyond what I posted here. A little help please.
I have had an M101a2 for several months and have been using it to hall dirt, and some rubbish to the dump. The surge brakes have not worked since before I purchased it. When I first got it the master cylinder was full of water so i sopped the water out and that is where it stands today. I have...
My comments were centered around Pawnshops post #10 concerning securing the lunette ring, I suppose I misread the overall thread, sorry if I added confusion.
I got my cover from GMA - Protection Technologies
Once there select Production Technologies, Solutions, NSN Search Catalog.
54878 > Camo, 53614 > Tan, 54243 > Green
I believe the M101A1 fits the A2 as well.
I have kept a length of chain and a padlock with me and after uncoupling just looped the chain through the lunette ring wrapping it through the center and around as many times as needed to draw the two ends together and slip a padlock through. Works for me.
Man what the heck were they thinking, what's wrong with a carrage bolt and nut? Ya I know - if a toilet seat costs $800.00 they had to find a way to spend $450.00 for a fastener.
This sounds like it. Do you know how to get them off without damaging the brackets? Where can I get replacements. I know I don't need to replace the original with original but I would like to is it's not to expensive.
Thanks Guys, I appreciate the help.
I have an M101A2 that I am rebuilding, starting with the wood. My question is how do I undo the fasteners that hold the rails to the hardware? For that matter what type of fasteners are they and where can I get them? Thanks for the help.
I talked to Croft this week and was told that I should drill a hole 1/4 to 1/2" deep the diameter of the set screw and that would ensure the lunette won't turn.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!