Search results

Update: I believe the IP is functioning properly because the truck ran prior to the filter change. So I did the following 1)replaced all fuel lines 2)removed stock canister filter and replaced with two remote filters (fuel and fuel/water separator). Was able to get prime with no air present...

Reference the hand pump, search the following on google "ebay item #171813055924" $49.95 shipped. The hand pump has one way filters but 2psi will open it so I added a needle valve to be able to close it off prior to the hand pump. I will wait for the batteries to fully charge to try the ether...

Turned screw in and no start. I will have to go through all the lines and canister again to make sure no air leak. I'm wishing I hadn't changed the filter as I need the truck for an event on the 23rd. Hoping I get this issue solved soon.

Thank you for the quick responses. I checked the emergency shut off and made sure it wasn't engaged. I'll have to check all the wires to make sure all connections are tight. Then I'll have to wait for the batteries to charge as I ran them almost dead trying to start it.

This is my first post and would like to say thank you for all the valuable information on this forum. Here is my issue. I've had the truck since March 2015. M923A1 with Cummins NHC250. Truck was running good and then I changed the fuel filter as regular maintenance. I searched and read all the...