Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ok guys you all have good points regarding corrosion,design flaws etc...my HMMWV is from 1985 and it´s never a good idea to construct a vehicle that is mounted together with rivets like papakb said...and expect the bodypanels to pass current as good as when new. However when i was istalling the...
Update regarding my issues with the waitlight: Measured all the glowplugs,about 1,8 ohms all of themdid some groundchecks and decided to install a ground harness kit from engineblock to..generator,starter,on top of nartronbox and the bolt behind doghouse, like videos on youtube suggest..and my...
Thanks for your reply Tobash.
I´ll have another stab at this tomorrow,putting the Nartronbox back,cleaning the connectors with contact spray and see what happens,maybe i get lucky,fingers crossed.
Thanks for your reply JKcondrey
Yeah i have been troubleshooting and looking for bad connectionpoints today,pulled the Nartonbox and had a look inside it,but can´t find anything burnt or a burnt smell..no nothing,looks like brand new inside..but then again it´s electronic stuff so there can be...
Hi guys..today my HMMWV started acting up,when i turn on the ignition the glowplugrelay makes it's normal clunknoise and the wait light turns on..but does not go off. After about 20 seconds i started it anyway and starts up right away as usual..but the waitlight does not go off until i turn the...
Hi guys,,having some trouble with the brakelight in the dash,it just wont light up..just glowing really faint and only visible when it´s really dark.
I have checked the TM and it apears that there is a resistor of 300 ohms built in to the lamp housing,so pulled out the indicatorlamp and
measured...
Hi guys,i had the same fuelleak problem with with my HMMWV and just like HoveringHMMWV it turned out that the fuelleak was coming from the IP,turns out there is a weephole beneath the pump that releases fuel right down the valley when the seal begins to go bad,pretty neat instead of flooding the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!