Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Need to get rid of 400 - 500 gallons of WVO that I have collected. You pick up, its free. I'm in the Shenandoah Valley of Virginia. Call me at 540-325-2616. Rick
Ok, thanks guys. I bought a take-out last week and it worked fine, I just thought I would rebuild the old one and put it on the shelf for future use since we are using 4 M35A2's in our operation. I'll keep my eyes open. Thanks again for the info,
Rick
Are the individual components available to rebuild a generator for M35A2 ? Does it even make sense money wise to do so? Our local alternator/starter rebuilder can't get the parts I need, but thinks it may be too expensive anyway. Thoughts?
Thanks, Rick
I ran into the same problem with our shop vans. After studying it, I found out it was very easy in Virginia to get an oversize permit online, and not very costly. The only problem was I did need the exact diminsions for the permit application. Turns out I was only 6" too tall and the permit...
Does anyone have the performance curve ( HP at different rpm's) for the LDT-465-1D ? A copy of it would be greatly appreciated. I searched for it but may not have done it right. Thanks
Does anyone have the linkage rod that goes from the transfer case pto to the handle in the cab of a deuce? I can't find one at Memphis or White Owl. I can make one but thought the proper one might save me some grief. Rick
I went through the exact same thing, called and talked to them many times explaining that I had been watching and watching, no e-mails of any kind. Ended up paying the #*!%@*!$ fee.
Rick
I have a couple of antique wreckers (49 Studebaker and 55 Dodge ) and have the same trouble. My insurance won't cover anything behind them unless it is on a trailer.
We just put an old 9' Galion bed on one or our deuces and used the PTO that you would use for a winch. Then we mounted the old hydraulic pump on the side of the truck frame beside of the engine. We cut down an old winch PTO shaft to connect. We are using it on a construction site, and so far...
Ours was camo out, forrest green in cab and engine compartment, blue engine, white in box, when bought from surplus in the mid 90's.
Rick
1 - XM 819
2- M35A2's
1 - M886
1 - 100KW gen set
multiple trailers
I am wondering if any of you guys that are out on the road with your trucks have ever been checked to see if you are burning the low sulfer diesel fuel. I would love to burn our used motor oil, but our trucks are used for municipal use; I can't take a chance on ending up on the front page of...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!