Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I was changing a leaky o-ring on my two piece steel rims on the 931A2 and stripped a stud. These are the 3/4" - 16 threaded studs with the round head clipped off one side. Having a hard time locating one. Most military parts suppliers are out of stock. Anybody know where to get them?
Thanks for the speedy reply. I did put a manual gauge in and it reads 90# at idle when cold (40 degrees outside). I also installed a NOS oil pump as I had cracked the suction threads of the old one when I replaced the hoses. Also has fresh oil 15W40 Delvac oil placed in it. Should I try to...
I also just converted mine today to spin on with a Wix filter. I do not recall the oil pressure before being this high. It is reading around 90 PSI cold, although it is almost 40 degrees here. I also put a dial gauge in to check and it is correct. Have not ran it more than a few minutes as I...
I have a M929 dump truck and it appears the hoses for the motor oil pump are seeping. There are two hoses with a swivel on one end of each. Removed those, but the problem lies that the other end is directly threaded into aluminum parts. I have put a wrench on them, but they do not budge and...
Just picked up one of these truck tractors and got it home over the weekend. The transmission in 5th gear is slipping and seemed to progressively get worse as the trip went on. I do have access to a spare MT654CR transmission but do not know the history on that tranny. Is there anything I can...
My son left master switch on truck for the past week and batteries were completely dead. Since i do not own a 24V charger, i had to charge all batteries individually. When I opened the box, I saw this individual wire without a connector taped to negative cable. Was wondering if it is supposed...
Just bought this truck and thought I had better change fluids and filters. Was looking under truck and I do not see an oil filter. From looking thru an owners manual this could be possible, is it? also has anyone ever cross referenced the fuel and air filter over to a wix or equivalent brand...
New to this site as I just bought one of these last week. Hopefully will be getting it home here soon. Was looking for an owners manual for one of the AM General trucks. Could someone post a link or send me a .pdf. Figure I should change all the fluids in it when it arrives. Thanks in...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!