Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I will be pulling the dash this week. Yes the heater works. The 4wd light comes on when engaged don't remember if the oil light works or not but I will test that while I have the dash apart
no gen 1 light with key on engine off. voltmeter never gets full. gen 2 charging properly. i have went through the TM's and wiring diagrams as best i can. the excite/ charging plug red wire has 12v key off. the brown has zero. with key on they both have 12v. main red wire has 12v. heater blower...
yea i searched and found a lot of similar posts before i posted but all the ones i read wound up being stuff i already checked. like the fuse or loose connectors or bad grounds and such i didnt test the exciter wire because my multimeter went dead and i don't have another battery at the moment...
as the title says the gen 2 light comes on with the number 1 as it should before starting. but when you start it the gen 1 goes out like it should and the gen 2 light stays on bright and the volt guage stays in the yellow.
is it bad? all the fueses in the box are good where is the relay for...
ok i got a question the #1 alt on drivers side. isnt working according to the tests in this thread but i have another wire im not sure about.
my alt has the ground wire the red hot wire the 2 wires in the plug (one red and one brown) and then another little brown wire that has a push on style...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!