Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Just a little exaggeration. I like to verify wiring from point A to point B. Never know if someone was in their landing wires to the wrong terminals. I would however start with the P&ID and meter.
So just to update, I changed the S5 interrupter switch and now I have voltage at the output terminals. Green light on. thank god, didn't really want to start cutting zip-ties to trace wires in that wire forest lol. The last question I have is how long do you typically have to hold the start...
Not yet...When I got it the genset it didn't run. After cleaning the tank, a couple of new hoses, and installing a new pump with an injector block cleaning it runs great now. I then proceeded with testing the generator. It runs with no faults and has 120/208 readings on gauges and one side of...
Thanks, I found them. All are in the same direction grey side to the left. Ill have to look closer in the morning when light. Thanks a bunch for the support!
Yes sir. I have tested S5 and it seems to be bad per the TM results. K1 contacts are not pulling in and the interrupter light works when I push it in. I pulled and tested K1 via 24vdc and it checks out. I then proceeded with the switch and got bad readings when I followed the manual. Ordered a...
Good day. I have a bad S5 INTERRUPTER switch. I can't find a replacement anywhere. Will part number 8906K4519 for the 803 work? TM for the 804 has part number 88-21076. Is there a good site to acquire parts? thanks
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!