• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 86humv

    Rear Radius Rod

    The shorter tube works with the Moog tie rod ends for trucks with 12k hubs which have different steering arm covers.
  2. 86humv

    Rear fender condenser to Red Dot install thread

    2 condensers are for the 4 man A/C. If using a redot system...you can run one condenser....most people used the right one. On a M1152 with 2 man A/C, they only use the right condenser....a blocking plate is on the left.
  3. 86humv

    A2 M1123 - Troubleshooting Stop Lamp Switch

    Power from light switch goes into turn switch at pin D and comes out to brake lights at pin c So...switch has to be connected.
  4. 86humv

    24 bolt wheel bolts?

    Same thing
  5. 86humv

    12K half shafts, all the same?

    Thats my photo up there.
  6. 86humv

    A2 M1123 - Troubleshooting Stop Lamp Switch

    Those brake switches go bad internally..[ contacts ]... The 1123 has the dual switch...mech. connected together...one for trans, one for brake. I took some apart, and the brake side was bad internally...spring broke, and it flopped around.
  7. 86humv

    Slant Back Roof Leaks

    Rear hatch seal is 12339595 for steel rear hatch 12480634 rear seal on flee bay is cheap, but only for thicker aluminum hatch.
  8. 86humv

    Stuck Fan Clutch

    Don't whack the nose cone...it will break.....Add 90 psi air to the hose going to clutch....and whack body only.
  9. 86humv

    Windshield Frame

    With mine...you lay roof on and add front brackets { outer ones } with all hardware to get location...mark 3 hole from each bracket....take off hardware, and drill holes on inner layer only and add rivnuts.
  10. 86humv

    Alternator pulley education

    Disconnect regulator before welding
  11. 86humv

    Alternator pulley education

    I have new ones available if yours don't come off.
  12. 86humv

    What goes here?!

    There 13 bucks at Macmotors
  13. 86humv

    Brush Guard Bracket

    Here is a 9k plate...brackets circled in blue are used without winch. Brackets circled in red are to extend out for a winch.
  14. 86humv

    Brush Guard Bracket

    Those are one of the 2 types for mounting on a 9k winch plate.
  15. 86humv

    Brush Guard Bracket

    You would need a winch plate, and 2 brackets for it, and the 2 guard brackets.
  16. 86humv

    Brush Guard Bracket

    It won't work on the 3 hole bumper normally.
  17. 86humv

    There was a 66" Ibis tek light bar on eBay

    Somewhere ..I have power cable.
  18. 86humv

    Has anyone seen this AWESOME spare tire rack system?

    PM Sent
  19. 86humv

    Has anyone seen this AWESOME spare tire rack system?

    Un-painted
  20. 86humv

    Mile Marker Winch Brackets

    It will mount on the 9k elect winch plate...and with extension.
110,074members
164,811threads
2,318,720posts
1,153online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks