Search results

As I said.....Still need the 2 brackets 12469393-1, and -2. And that pressure regulator is for the diff. cooling...If no coolig diff, then no regulator. There are 3 differnt power steering pumps...Stock GM style with built on tank, and the 2 ea. A2 types with remote reservoir. Early puts out...

Factory original new style is ready to go...no mods or wiring problems with some none OEM part.

That winch needs 2 ea. mount brackets pn. 12469393-1, and -2. You can lose the regulator as its only needed for rear Diff. cooling.

New style sending unit and access cover.

Depends on if : V belt or Early or late surpentine .

Low cargo bows. Wire cover

I have some extra Comtec wires : 506B350-01 4 EA....male / male 506B395-01...1 EA.....male / male 506B348-01...1 EA.....male / female 506B351-01...1 EA......power

As Geico says : even a caveman can do it.

Latches on X doors are the same on the same side.

I have a few PA to RT 10535-0720-B17

Book 10515-0122-4200 has cables that should work.

Been buying from mac for years....never seen them sell used parts....They are a good place.

The ebay separate, wire harness is a relic of the 80's...dont buy it unless doing a NON oem manual system.

The SSI black 12469158-1 box in photo works with temp sensor 12469158-2....either the black top Nartron, or the yellow band KDS. Only Black box that needs no sensor is the Green label KDS.

Try a Bose, or Racal 5000.

Clocking.

If you have 12" vented rotors...I have nos surplus pads........2530-01-420-8025

Do you have the cable from intercom to radio [ cx13489, or cx13473 ] ?

:smile:...Take the body off, and put in on a 3/4 or 1 ton truck frame assy.....Good to go.

I might have an NOS one...I'll look