• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. rtk

    The EPA/DLA stoppage and where we stand and what we should do

    Thank you for the info . I know a lot YOUR EFFORT went into the story . Thank you from the "OD" community . Lets all hope for a good and quick end to this story . Bob k
  2. rtk

    Sloppy Gear Shift

    Very Nice work . The whole B series transmissions were a improvement over the early units . They are interchangeable and all around are a better unit and are a LITTLE hard to find . I bet there are a lot left in SEA !
  3. rtk

    New Guy From Upstate NY

    Welcome from Lockport , NY !:tank:
  4. rtk

    Sloppy Gear Shift

    No problem , I have the old shift tower and it is yours for the taking if you need a part . :tank: bob k
  5. rtk

    Sloppy Gear Shift

    Just call vintage or Midwest Military and get a NOS top cover , about $100.. Replaced mine last winter , common problem on M37's . bob k
  6. rtk

    F134 Engine

    I second what Karl said . IMHO , learning a engine rebuild on the fly is NOT the way to go . Part of the process is checking over the old parts for wear , gives you information for the rebuild . Do you have the tools ? I could go on and on , point is your best bet is take the engine to a GOOD...
  7. rtk

    Mule tire changing?

    I just changed my tires this week . I purchased a HF Tire Changer which worked OK taking the old tires off , but I bent the tire bar attempting to put the New tires on and started to rip a bead . I then went back to tire irons and LOTS of tire lube , but started to nick up the aluminium rims to...
  8. rtk

    Could a M1028A3 possibly just be a M1008?..?

    Because my mind is SHOT , not sure where I saw the classified , here on this site or that other big buying/selling site . Looked like a nice MV through , ride and drive as they say .
  9. rtk

    Could a M1028A3 possibly just be a M1008?..?

    Should be right side top of the frame rail just behind the cab . It's pin stamped into the frame so if there is a lot of rust it could be hard to see .
  10. rtk

    Could a M1028A3 possibly just be a M1008?..?

    I think I looked at the same MV and I had the same questions , something does not appear correct with the data plates and/or the MV . Some where along the line SOMETHING got changed .:shrugs:
  11. rtk

    Steel Soldiers, users age

    I think the bottom line is no matter what your age , this "OD" addiction is fun . It keeps us busy and out of TROUBLE ? and give the neighbors something to talk about ! LOL . :beer: Bob K
  12. rtk

    Winch on sale today.

    If you are interested I have a NOS 18,000 LB Warn 24 volt winch for sale , PM me for details , Bob K
  13. rtk

    Reverse kicks

    How are the rest of the shift's ? I would check all of the above . plus make sure your have vacuum to the modulator on the side of the trans . Bad vacuum hoses are common on these vehicles .
  14. rtk

    Crank has me all cranked up

    Agreed , sure looks like something got to those bearing journals . If it were my engine , I would hot tank the block , head and crankshaft , line bore the block , re-size the rods and perform any other machine work and reassemble . Your next problem would be to find a good machine shop .
  15. rtk

    New Guy with M1008 from Eastern Long Island, NY

    PM me and I will give you the secret story , just don't tell anybody ! LOL Bob k
  16. rtk

    New Guy with M1008 from Eastern Long Island, NY

    Welcome to the insanity !! IMHO , I think a CUCV is a great entrance vehicle to the Military Vehicle hobby . Parts and pieces are readily available . They do have there issues , but so does my M37 , so go for it and have fun !!!! We have a few CUCV members in our club and I would also suggest...
  17. rtk

    2014 MVPA National Convention- Louisville, KY

    It was a GREAT show , picked up lots of stuff , 4 TRIPS to the truck ! Paddle Boat ride was a lot of FUN , nice way to see the sights . Hats off to all involved in setting up the shows , lots of great effort ! I was surprised at the AMOUNT of MV's on display , some really , really nice vehicles...
  18. rtk

    Crank has me all cranked up

    If you could post a few pictures of the bearings , it might help . Hot tanking the block is very important as well as making sure the oil passages are CLEAN . I would look for a new crank , check your rods and mains and line bore your block . BTW , it sounds like what ever happened started at...
  19. rtk

    Crank has me all cranked up

    Usually when the bearing wear prematurely , I would look at contamination and or oil starvation . Did you hot tank the block and check all the oil passages ? Is it just one main bearing/rod bearing ? all of them ? . IMHO 60 over cut to the crank is a lot .Did you line bore the block ? Sorry to...
  20. rtk

    2014 MVPA National Convention- Louisville, KY

    Just got back to the Hotel . VERY nice display of MV's . Lots of vendors , ( Usual list of suspect's LOL) Very nicely done . Seemed to be a good crowd , and as usual spent lots of money $$$ !!!!! 4 trips to the parking lot to put the goodies away ! :tank: bob k
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks