• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. SouthernSteel

    Questions about my M1009

    Haha Westech u were young once hahah make sure it runs Before looks :] Good luck m1008 and m1009s will keep u Busy. Working on these can be worse than a woman with PMS and and a gun lol :funny::grd: I have 2 of them :]
  2. SouthernSteel

    M1009 eating alternators

    Ok i ran in the problem i went and got the Autozone alt the part number is listed a caddy for the 12 volt IM GOING TO STRESS DRIVERS SIDE ONLY and have been using it with no problem i only have the isolated ground alt on the pass side so far i have been on this combo for about 6 months with no...
  3. SouthernSteel

    Runaway Starter, but different with what wires not to pull

    thanks doghead does that mean that even though i unhook my neg cable every nite that the starter might still have power
  4. SouthernSteel

    Runaway Starter, but different with what wires not to pull

    ok i thought i missed something Doghead thats the only reason i made the comment i have something that might be of interest that might be an idea however this doesnt occur everytime my red m1008 has the doghead relay conversion done doghead is it possible that the relay might be apart of the...
  5. SouthernSteel

    Runaway Starter, but different with what wires not to pull

    So what was the root cause as i know im slow :] :beer:
  6. SouthernSteel

    MN to NC

    What part of nc u comein to :]:wink:
  7. SouthernSteel

    Time for new fenders

    Oh yes dont forget to warn the guys in the body shop about using PROPER PPE When sanding on the CUCV that Carc paint is nasty stuff Look at the MSDS sheet its got some stuff in it u dont want to breath good luck im with the others its hard to get the body lines not impossible time consumeing yes...
  8. SouthernSteel

    Has this oil really been in there 19 years?

    Would have loved to get ahold of 1 of those :]
  9. SouthernSteel

    Has this oil really been in there 19 years?

    Very odd indeed,Oil doesnt go bad completely but i suppose after that length of time am sure an oil Change might would be due Cause the oil to break down wouldnt it The oil does have an experation date :beer:
  10. SouthernSteel

    CUCV "Must do" mods?

    If its Rubber Replace it and if its Electrical clean it i cant stress that Enough i learned the hard way lol Most defintely The Doghead Relay Starter Conversion both my M1008s have it :] wouldnt dare drive em with out it Good luck my friend these trucks rock Speaking of that Those styndyne...
  11. SouthernSteel

    thinking about doing black white and grey camo

    As a few have said john if u can live it dowhat ya want its your truck:] im happy with od green and red my red one gets a few looks cuase of the push bumper and the cleavis's hanging on the front and rear bumpers which lookin at it u cant tell its an old military truck most people think its...
  12. SouthernSteel

    OK I got her home!

    Im so jealous nice find and nice ride Love those m1008s i have 2 u really got lucky have fun with it i know i do as much as i go through with it i have to say i smile everytime i get behind the wheel :D
  13. SouthernSteel

    Doghead starter relay question

    Oreillys is $9.99 as opposed to napa $15 very easy to get lol Yes cleaning contacts my poor m1008 was hacked lol so i have near about replaced all the original plugs im happy to say my army m1008 was original so i was able to compare hahah
  14. SouthernSteel

    tilt wheel in cucv

    Well if this is the case im going to try this again Guys im telin ya i had a time lol thanks for all the info i have the army m1008 that might get the treatment first lol thanks again yall for the input and detailed info
  15. SouthernSteel

    Well Guy and Girls i have rescued another m1008 More info to come :]

    Well im gonna use this thread to ask this question? Did the Goverment have a partnership with Jasper to rebuild transmissions or was that a normal occurence reason i ask is i saw a metal tag with jasper wrote on it on the trans case if anyone kinows anything feel free to chime in thanks yall
  16. SouthernSteel

    M-1009 Speedometer face plate problem

    Wow sorry to hear that hope u are able to find a replacement go look on ebay u can get whole Clusters for fairly nothing i bought a few from there Good luck :] ;-)
  17. SouthernSteel

    tilt wheel in cucv

    Im wandering myself to this day people swear they didnt have a problem thiers something diffrent exactly what im not sure i 2 would like to put a tilt column in but with all the issues i had im just gonna have to put a Cucv Column in Would love to know what the exact year of the Tilt column...
  18. SouthernSteel

    New Deuce owner from NC

    im lovein that Deuce Good lookin ride Names john i dont own a big truck like that but i have 2 M1008s Welcome To Steel Soldiers and Always good to See another NC member :]what part of NC are u in im down here around Jacksonville NC Home OF Camplejeune ;)
  19. SouthernSteel

    tilt wheel in cucv

    im very Confused with this plug and play stuff its not true Ok for the post nazi's i know this this thread is a almost a year old. Im really Curious as to how the Tilt Column is a plug and play i could see a column Coming From another diesel being that way.But Tilt Columns From Gas vehicles be...
  20. SouthernSteel

    Vintage Chevy Advertising

    lol i think we are all sick i know i would love to see some of those Cucvs :]
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks