Search results

Just cut your fenders. Skinny is right. Google search for blazers or look on pirate or ck5 for 8 inch lifted blazers. I run 37's with a 5 inchlift.

I think this is getting out of hand with who does not like ORD and who does. this thread was not meant to turn in to this imo.

Randys ring and pinion.

Diy4x makes them EZ Inch Also if u call WFO speak to Beau or Trevor.

its the best paint job there is!

Yes WFO imo has way better customer service and they mess up less. PB your right its not an excuse its just the facts. I refuse to buy from them because of the customer service, not the products they sell. I sent a message to Stephen Watson on face book hoping he will check this out.

PB Denise is the wife of the owner. The owner Stepan Watson is very involved. they are a small shop that is out growing its ability for good customer service. there products are great its just the follow through that is lacking some tact.

I ran mine to the stock location and cut the metal hose that comes off the fuel pump abd bypassed the mechanical one.i installed the pump on the passenger side on the frame rails. you can use a SBC block off plate. my pump works great i have no stalling issues. but since i am crazy i run both a...

I would look at your u joints first in the drive shaft and if that's not it maybe motor-transmission mounts.

why so many on one side ?

could also be a tire out of balance

Sorry im working if i had more of a notice i would, next time give more notice.

I have read on here on how to fix the resistor, i need to do the same but i am going to use my spare meter.

I mounted mine on the frame rail right under the cab and just use rubber hose to connect it to the metal fuel lines.

I dont think they are related.

I dont go wheeling with out friends plain and simple. do not put your self in a position where you are alone and with out help. if your unsure dont go.

sounds like the resistor on the back of the meter is bad. oh yeah and if your no broken down change the thread title.

if you lived closer i would let you run my space drive shaft and see if that fixed the problem.

I have no vibration on my m1008 it has about 5 inches of lift on it. Check your d shafts like said before. Putting in a 205 is not worth the time vs cost in parts.

If your going to go that rout just run h1 rims or get weld on bead locks from diy4x4. Screws are good for a 15 second race but not practical for dd use.