Search results

I use American Collectors Insurance , which is a part of USAA . Nice people to deal with and good rates . There only issue is they want ENCLOSED storage , which can be a problem . I have covered storage , so it's not a issue . I have all my vehicles reged as HX , cheap plates , probably the only...

What fuel type does your registration say ? If it's a gasser you need to change it . The shop is also able to do a manual change durning the inspection procress . The inspection machine reads the bar code off the windshield reg , so if it's wrong that could be the problem . NYS DMV does not use...

1953 M37 , winch , hardtop , a work in progress . Just rebuilt my winch and refinished the bumpers . Winter project is the wire harness .

You should be able to pick up that gear at just about any GM dealer , VERY common problem in GM vehicle's for a LONG time , do your ride a BIG favor and change the filter and fluid ASAP , those little nylon gear parts went somewhere and now would be a good time for a change . The trans pressure...

I would check all the basics , but if you have a "weak" reverse , it generally means you have low main line pressure , not a good thing , indicates time to OVERHAUL . Main line pressure is HIGHEST in reverse , it is a basic step in a trans check , bad reverse engagement , low pressure . Have...

I really wanted the 411703 , just could not find one locally . I wondered about using two seals in place of the original , which is a felt seal and oil seal . I also looked in the Timken catalog , but that was what is listed for that seal number . It is also the type of seal stocked and sold by...

Just got back from Buffalo bearing, the correct Timken seal for the worm shaft is a # 471689 , measures 1.000 x 1.752 x 0.250 , as a FYI . That number is the new number for Timken seal 411703 . BK

Thank you for ALL the info , I did a search under "winch seals" and didn't get anything useful ,o well , I am still learning the system . Yes I would like to use a double lip seal , the single lip is "ok" but double lip is better if I had my choice . The reason I am checking and reasealing the...

Does anyone have seal numbers for the seals on the worm shaft ? I am in the procress of checking and overhauling my winch and need some seals . The gears and bushings look almost new , very little wear , freed up the declutching shaft , a few gaskets and seals and I should be in good shape ...

Is this a A3 or a 5 ton ? When you removed the air valves , how did you cap the inlet pipe , did you add the schrader valve to the elbow? I am a little confused when you say you add air to the rears on the inside , which makes this a 5 ton maybe . pictures would help . bob k

Sounds like a points and condenser problem ,but make sure of your coil and all wires . It is a pretty basic system power to the coil , and good points AND condenser and you should get something .

No spark can make you crazy , Are you sure about your test coil's ? if everything else is good I would replace the points , even if they "LOOK GOOD" . Start with the basics , are you getting power to the coil ? you can run a jumper right to the coil and bypass the switch . As they say if in...

Doghead , you are in fact correct , It is a CRIME in our little state-o to use bogus paperwork to obtain a title , maybe he should have come here , a vehicle that old you can register with a bill of sale and it only gets a registration , HX plates , good to go . But he got it done that's all...

The correct name is Idahmotorpool , I just checked my favorites , he has a ton of 151 stuff . bob k

Idaho Truck Parts , used to have a lot of M151 parts , they are in the procress of "getting out" of 151 parts , you maybe able to get some DEALS , bob k

Welcome to the site and be ready for the "GREEN BUG " can't have just ONE ! I am in Lockport , I sent you a PM , I am ALWAYS available to give FREE advice to somebody just starting out , just talk to my wife ! This is a great site with TONS of great people and a LOT of INFO on just about EVERY...

I have removed the wheel valves ,weights and guards , I am in the procress of installing 395's and will not be using the system . I have a leaking Quad seal and plan on installing A2 wheel bearings and seals . I spoke to one of the wrench's over at the base and he said the CTIS system is one...

Welcome to the site , greetings from western NY ,

When my brother first started his Fire Dept in Waterloo, Alabama those were his first vehicles , with the slide in pump . He also had a M211 , with home made tank and pump . They were provided by the Forest Service and had to go back to them when he was finished with them . That was back in the...

Would that be the wheeler dealer off RT 98 in Elba would it by chance ? If you are looking for a MV you should PM me . I can hook you up with the local MVPA group , save you a LOT of stress , bobk:grd: