Search results

Welcome aboard and Merry Christmas! I'm sure plenty of members will be glad to help you with the answers. I have found(took me a while), that almost any question you can ask can be found by using the search feature. That being said I still post questions to get feedback from other SS members...

RE: Re: RE: Re: Deuce Guntruck Foud a link here on SS that has some in action in Vietnam. http://134.198.33.115/brown/brown.htm littlebob

Just looked at the map and see a few more members from Louisiana on there, but I know I've seen posts from more. What would be the definition of an assistance member? I'll always try to help any other members when I can...

Thanks again for alll the info. I've always had a feeling it was older than 72. littlebob

Thanks, littlebob

The mount is bolted. I couldn't find any numbers on the cab, hood or frame. Thanks for all of the help, littlebob

Got the bed off of the Deuce and have been using the needle scaler to try and clean uo the rear part of the chassis. I came accross this bracket on the right rear and have no idea what it is for. Thanks, littlebob

Mine had been sitting a while. I can't believe it ran at all when I got it.

here is the picture:

The plate on the right side only has the id# and contract# stated above. They both look shorter than any I have seen before. I'll go take a picture before I call it a night. Thanks...

Great to see your daughter spending quality time with you. Cherish these times, because I had one too and at some point I just became a stupid old guy with a wallet. Mine is fourteen and these are the hardest years. littlebob

I was reading kipman's post about more info on his and wouldlike to know if anyone can help with mine The nunbers on the frame, drivers side: 2061(small) 119307(large) Identification number...

I think I've read that the fourth hole is for the steering shaft when the cab is mounted on a 5 ton. why both would be knocked out? My deuce has no heater, so I don't have the three o'clock or six o'clock holes knocked out...

I had a friend of mines son throw a rock through the rear window of my wifes 77 Caprice after our wedding and it was already down from the transmission that I had destroyed. I gave him a good tounge lashing as did his Dad and we let it go, I didn't have the money to fix the transmission for many...

RE: Here is what you need Westy When I see redneck and snow, I want to know who moved north. littlebob

That undercoating is a PITA if you are trying to repaint. Paint doesn't stick to it wee and its hard as hell to remove.If it was used as designed and put on a ..properly prepared surface it would be a good thing, unfortionatly my truck had a depot rebuild in the late 80's and now some of it is...

RE: Re: Bad fuel choice.......I I usaully use laquer thinner for cleang carbs and it works well. Anything it doesn't destroy should be really clean. I don't know where all of the parts are that would be affected, but I would try to get it out as soon as possible a run straight diesel fuel...

I haven't posted picks latley because of camera issues, but I know ther some on here when I was working on my cab for the Deuce. I had to use strpper to or more times to remove the red paint from a FD and It wa real pain. I used aircraft strirpper then scraped, then used aircraft stripper and...

OOps, I was thinking about a Deuce, I forget ther other vehicles that we talk about here. sorry!

I've heard that engine will run without the in tank fuel pump operating and can't remember what was said about the things that would happen if it wasn't working. I have also read a lot of articles that Bjorn has posted and put in print. Having worked on cars and trucks with the DC systems for...