Search results

so. in this case, if I quickly accelerate, it sounds like a jet engine turns on (is this the clutch disengaging?) and stays that way. Keeping the engine at about 187 degrees. If just operating normally (no mashing the accelerator) the temp goes to about 220 and stays. Is this normal...

When you step on the gas and the tdm valve engages the fan clutch, is it supposed to disengage the fan clutch after 20 seconds or so? If I get mine to kick on from mashing the gas pedal, it stays on. Truck runs at constant 187 degrees while on. Do you have to do something to "turn off" the TDM.

I only see the non-hinged blanks in the TM. Are there part numbers for the ones with the lower hinges?

They would be the filler panels with the lower half hinged, to get access to the "tool" compartment

My unit came with just the blank rear door panels. Are the panels that have the hinges custom made? Or is there a part number for the ones with the hinges to access the compartment?

Is there a special part number for the blanks with the hinges to make it an access panel? Or are these custom made?

Erik's has confirmed that it should be 10t, and that's what theirs are. Ahh, closure....

Just trying to be prepared for the inevitable. But with the correct parts. Don't want to tie up the shop for a week waiting for something to arrive

That is interesting. Meltons is not that far away from me, and they do not list how many teeth, just that it will fit the M998. I will reach out to see if they have come across a tooth issue

https://www.ebay.com/itm/363695963571?_trkparms=ispr%3D1&hash=item54adf7fdb3:g:7EsAAOSwmBNh57v9:sc:ShippingMethodStandard!08527!US!-1&amdata=enc%3AAQAGAAACkPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsS5%252FLJbfonbQUYd49AU1AJY7UKOSDNzxXpultfsD8rcXTSk4JoXE45XWPUDMecwoPiXxbLEhUbq1U425D8BtOJhd2puv...

So, then we are saying that the 13t starter will be able to work with the diesel 139t flywheel?

And that would apply to all 6.2's? this is the tag off the starter itself, still on the unit, a little beat up

Looks like the starter will need replacing soon. intermittent whizzz sound at start sometimes. it is a '93 or '94, and the manual that I have shows 2920011687891 or MFY 6701UT. That shows to be a 13 tooth pinion gear. I also see that some starters for these have a 10 tooth gear. Is there a...

and then the chassis would be the ground? +12vdc cig lighter to battery then the -12vdc is the chassis?

so, you just wire it directly to the battery?....not from the rectifier?

I have a dual voltage 200A generator. Does anybody have a diagram of how to run the wires from the generator to install a 12v cig lighter in the dash? Any help would be appreciated

in this case, the rear battery is the weak one. So if I put it across that batter and try to start, it should be ok?

Can you jump the batteries with one of those mini 12v battery packs (2000A, 18000mAH)

Excellent, thank you

where would I happen to find the in-line fuel filter? The picture in the manual looks like it is behind the air filter? Is that true?