Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Gentleman, I have been working to finish fabrication and assembly of a m1078 brush truck. I am about done and after a test drive i noticed the fuel tank was pressured up a bit, can any tell me is this normal, or is their a vent that is plugged? Kinda new to these trucks. Thanks
Guys, I had a reverse light problem on a m 1078 that led to a fan clutch solenoid question under another post, so I started a new post just for this. My fan clutch is free, I discovered this by applying air directly to the fan clutch fitting on the upper shroud, all is good. Began to trace down...
I have had the cab up and serviced the truck, I just have the cylinder off at the moment. Yes, the fan/cab lift come from the wet tank. MY problem is the solenoid is not there, no hoses, wires. Its gotta be somewhere, I will find it.
OK, sometime you have to drag the slow kid along kicking and screaming, My truck is an AO, I keep looking at the schematics, pretty straight forward. Answer me this the VIM is the black controller under the dash on the passenger kick panel correct? I think I keep looking at the schematic for the...
I must tell on my self, don't scold me! I did away with the military light switch and went with one switch that turns on all of the lights ( marker and head lights) we did this on our m 923 to eliminate confusion. we did it also on this LMTV, SOOOOOOOOOOOOOO, I might have missed a wire, there...
I see, found the 36 foot schematic, and studied up. You have been a big help. Still dont have power there in reverse, I will chase the wires and connectors.
Need a little help, I have a m 1078 we are building into a brush truck for the Fire Dept. I was going to add better back-up lights, until I could not find a relay or fuse for it. I looked and sure enough, there was no relay in the board, or even contacts in the spot where the reverse relay...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!