Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Thanks for the replies and the parts sources. I took the side cover and rocker covers off again today. The rest of this is going to cause some of you to smack yourself in the forehead because I know its not right, and about as redneck as a guy can get. But I have nothing to lose, so I did it...
I have the DN2M/LPW2 engine from one of these that I acquired several years ago. I used it to build a home brew generator, which has been working reliably for the past 2 years. A month ago, it had a hard start condition, and would only fire on one cylinder. After a bit of tinkering, doing...
Yeah, the flywheel is a problem. zarathustra was able to help me out with one, as well as a few other parts that came in handy. Maybe he has another one. He is listed above. Once you get the flywheel issue sorted, look at cross reference numbers for starters. I found one for an Onan...
zarathrustra was kind enough to provide a flywheel and some other parts.
I suppose an update is in order. I was able to get the engine started and it runs beautifully. Shakes like crazy though! Is that a neutrally balanced flywheel? Or does it have a heavy spot that needs to be aligned on...
Thank you Brian. Perhaps my confusion is coming from the appearance of the plug terminals themselves, since I have never seen this engine in any form with a wiring harness on it. On the attached photo, the plugs have a screw terminal at the top with a thumb wheel type nut on them. My...
Hi.
I picked up a DN2M engine that is used in the 802a TQG. The question I have is regarding the heater plugs in the air intake manifold. According to the wiring diagram, these plugs are wired in series. However, I don't know how that would work, because the plug simply has a single screw...
Hello all,
I picked up a DN2M engine a couple of weeks ago pretty cheap. The engine appears to have been rebuilt by Lister Petter (fresh rebuild sticker on it) and put on a shelf for who knows how long. It has never been ran since the rebuild and testing, as far as I can tell. The intake and...
Hi. I just joined the site today, because I have a few questions that I hope somebody here can answer.
I picked up a DN2M engine for $200 that was rebuilt by LP and never ran, just put on a shelf until it was sent to DRMO. This engine is missing a starter and a flywheel, and the alternator...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!