Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I doubt you would be able to get the full rated power out of this head, but there's no reason it wouldn't work that I see. Just check the dimensions:
https://www.meccalte.com/downloads/s20w.pdf
You could just put a breaker (which you should put on anyway) on the output to limit the power...
You're looking for something with a J609B flange. I'm guessing due to the pandemic supply is rather constrained. I was able to find one that should work:
https://www.brandnewengines.com/S20W-110T.aspx
When I got mine it had a similar "Do Not Run" chalked on it, even though there was video of it running in the auction listing. After I got it, I found the engine and transmission were fine and the reason they didn't want it running was because the truck had no brakes.
Gave my girl a new smile ;)
and a lot more air to the radiator. I got the skid plate when I purchased the cab from a GL auction. Had to cut the bumper a bit to make it fit.
Got the Delrin. OD is a perfect match. As the product page states, the ID is a little undersize so you can drill it out (still need to do that). Looks like this is a great replacement for those $22 a piece bushings. The rod with shipping was $17, and I have enough left over to make several...
I'm doing my airbags right now, and like some other's experience, the bushing fell out in pieces. I called Ohio Hydraulic who called PP and they say they don't have any of the bushings (PN 2010000272). Does anyone have any leads on where to get these? I'm sure I could get some machined in...
This isn't the same part, but it is electrically compatible. Mounting holes are probably different though:
https://www.digikey.com/product-detail/en/te-connectivity-aerospace-defense-and-marine/LEV200A5NAA/A101172-ND/2362828
Looks like Ametek makes it, but they probably wouldn't sell a single...
Maybe this is a difference between the newer cabs and older cabs. I have an A0 chassis with a A1 cab on it. The newer cab has the two valves in the integrated module. That said, I'm inclined to believe NDT. He's a very knowledgeable guy on these trucks.
The ones between the knuckles are:
https://www.finditparts.com/products/289426/flagg-triangle-es431l
https://www.finditparts.com/products/289428/flagg-triangle-es431r
The one on the end of the drag link is:
P-12877-KL0 or 12877-KL
I can't find a source for it. The drag link itself is 12650...
It's been a while since I found it. I had a leak in one of mine, and started searching for "0912 piggyback" under the assumption that since the chamber sizes are standard any brand should work that's when I found the Euclid one. The one I actually ended up buying was from a surplus place that...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!