Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Goodmorning Members,
I just saw this post today. Hopefully not to late.
Well to begin: The older versions of the M1070 1992-2003 I guess don`t have the diff locks from side to side. They only have the front wheel drives and interaxle locks or power deviders from axle to axle. The newer versions...
Thank you for the info...do you maybe have a website from them or a email address? I try to google them...but find multiple websites. Thanks for your help in advance.
Hello guys...I need your help on the M1070. My interaxle differential lock got messed up from the third axle, and I bought another one. But now there is a difference between them. The original one has 26 teeth on the interaxle and 26 teeth on the side gear and the new one has 29 teeth on both...
Hello...does anyone of you who owns a het tuned the 8v92TA engine? I`ve been told that if you have a higher HP and higher torque you will have a better fuel consumption. Can I just let the engine tuneup through the DDEC III and bring it to 550 or 650 HP and 1700 lbs-ft without changing...
Hello...did any of you change the air suspension from the 2nd and 3rd axle to a spring suspension. I don`t really like the air suspension for of-road with logs. Would it be a problem if I put a set of springs over walking beam suspension (60000lbs capacity) for those 2 axles and leave the 4th...
Thanks a lot for all the information...now I can get started :)
I`ve always used the TM`s from 1994. Now I`ve downloaded the ones from 2007 with much more details and information. I need to weld a new knife on the tractor bunk. Attached some pictures of how we use the M1070
Thank you guys...
Hello HETvet...is there a procedure in the TM how to do it and how to remove the DDEC? Do you have any picture where you can refer to? Do I need to disconnect the altenator cables from the batteries?
Hi 007...Thank you for the response. Is that all I should do, or should I disconnect some cables from the different parts that are mentioned on the caution plate?
Hello Steel soldiers,
I would like to weld on the M1070, but it is stated on a plate of the stowage box that the batteries needs to be disconnected, the DDEC electronic control module, 12/24v altenators and the CTIS controller and power manifold. See TM 9-2320-360-20. I`ve search the manual...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!