• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. K

    LMTV wont start

    it is a 1998 M1078A0. Thanks for the detailed explanation! It greatly helps, where the TM did not. I have yet to look at the polarity box. But now thanks to you and the General, I have a plan. I have a voltmeter and a battery tester. The charger I have is one from PulseTech.
  2. K

    LMTV wont start

    The readings were taken with them installed and hooked up as per the TM. I will remove them, charge again, retest and see if that improves the situation. Thanks!
  3. K

    LMTV wont start

    I am having the same problem. Charged batteries, verified at 12.8 V on back 2 and 12.2 V on front 2. Was running fine until I shut it off and tried cranking it again. Truck has been sitting awhile while I figured out my brakes problem... I get dash lights when I turn on Main Power, but when I...
  4. K

    Air brake pressure gauge malfunction in LMTV

    That is excellent advice, I really appreciate it. I will do the shop supply to the gladhand test before going further, to be sure. Thanks
  5. K

    Air brake pressure gauge malfunction in LMTV

    Thanks Mullaney! I take my excitement in small doses. And definitely not in a 9 ton truck going downhill with brakes and hope fading fast...
  6. K

    Air brake pressure gauge malfunction in LMTV

    Thanks Mullaney and Ron. Good to know! Yes, I recall the first time the air ride lifted the cab, that was an interesting moment for sure, this being my first truck with air brakes, etc. The truck is a first generation A0 with the CAT 3116. I live in an area that has a lot of hills and long...
  7. K

    Air brake pressure gauge malfunction in LMTV

    Progress report... After a lot of debugging, it appears I may have resolved some of the issues with the air brake gauges. I went all over the truck and found a few small air leaks and kinked lines (nothing major though). Then I replaced the two air pressure transmitters under the dash...
  8. K

    LMTV FMTV Exhaust Brake Questions?

    Thanks for the info Ron and General. I will see what PacBrake have to offer these days and add to the thread what I find out. Looking forward to Sean's video on how he did his install.
  9. K

    LMTV FMTV Exhaust Brake Questions?

    My truck is a 98 A0 with WTEC 3. What exactly would be involved in adding an exhaust, or a PAC brake? Assuming the WTEC 3 is already configured.
  10. K

    Canada - Prairies - (Alberta, Saskatchewan, Manitoba)

    I had no real issues with getting ICBC to insure it, once they saw there are already some M1078's here in BC that have been papered. The insurance agent was very helpful in getting around the red tape. I had to register it as a commercial vehicle (at least while I wait for it to be eligible for...
  11. K

    Air brake pressure gauge malfunction in LMTV

    I will do that, once I sort out my wiring issue. I found the troubleshooting section of the TM which gives the detailed instructions on checking for 24 V sender signals, at the PX4 and PX5 connectors on the back of the air pressure gauges and also how to check the grounding between the sender...
  12. K

    Air brake pressure gauge malfunction in LMTV

    One easy question that the manuals offer conflicting advice on: Which is the Front and which is the Rear air pressure sending units? TM Hi, I am getting conflicting info from a couple of the TM's, on which transmitter is for Front Brake Air and which is for the Rear. See two pages below, which...
  13. K

    Air brake pressure gauge malfunction in LMTV

    Thanks, I better go over the wiring in detail with my voltmeter. I bet I have broken a wire somewhere. Thanks again for your help and especially the wiring schematic.
  14. K

    Canada - Prairies - (Alberta, Saskatchewan, Manitoba)

    Yes, she is a real nice rig. I named her after my grandma, Gertie who was also an impressive lady originally of German origins and someone also not be be taken lightly. Yes, I had no problem getting it imported, inspected, licensed and insured. In a year I can request Collector plates, which...
  15. K

    Air brake pressure gauge malfunction in LMTV

    That makes sense. I wondered how the low pressure switches informed the system to turn on the low pressure indicator lights. So, I conclude that if I wire the senders opposite to the way the TM seems to state, then both front and rear air pressure gauges peg high when I hit the power switch...
  16. K

    Air brake pressure gauge malfunction in LMTV

    I am scratching my head on this one - the air brake guages have stopped working. I've got a first-gen M1078 A0 truck, mostly in excellent running order. Apart from needing to replace some rotten connectors on marker lights, it worked pretty well from when I received it from Memphis Eq. Been...
  17. K

    Canada - Prairies - (Alberta, Saskatchewan, Manitoba)

    Hi, My name is Harry Christian, I'm in Maple Ridge, B.C. I have a 1998 M1078 A0 LMTV and an M715 as well as an M101 trailer. Definitely interested in hearing about other MV owners here in Canada who have experience restoring and running these vehicles. Please give me a call if you have any...
  18. K

    FMTV Rotating Amber Beacon

    Try PEI-Genesis. They have the Cannon plugs and receptacles. For help figuring out what part you want to go with (straight or right angle connector on the power lead from the light) see the attached PDF file that I got from them. I also managed to find a new FMTV rotating beacon with the Cannon...
  19. K

    How many need a Detroit locker for LMTV ?

    I want it for my M1078 - I had the highway gears installed already.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks