Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Anyone know about guide stud at injector pump(DB2)?
I removed the guide stud for adjusting fuelthen reinstalled it correctly.
But no start after it.
I guess the guide stud is overly or weakly tightened
How much do I tightenthe guide stud ?
If i loosen it, fueling will be lowered?
I think its adhesion is the best for sure so that steel can’t be rusted by water or salt. Coal tar itself is adhesive, sticky, cohesive
but cons. Is also Clear
Really hard to remove, bcz it is not hard.
exposure of hot sun makes them more sticky, more soft but not melted. If you touch it...
Hell i feel like my transmission th400 in M1009 is burnt. It looks normal but malfunctions. Fluid level is normal and shift linkage is normal . After i did very hard mudding with m1009 i noticed sth is wrong.
The problem is move forward only with very serious slipping. Actually almost no move...
6. Shifter is for your option. You could use factory column shifter by lengthening shift linkage about 1.5inch. But i was going to full manual valve body mode it means it shifts at basis of shifter position.
Therefore i just made. Because aftermarket shifter are expensive for me. I bought the...
my m1008 truck is on highway for most of drving. when i run at 60mph, i thought i need Over Drive gear. one day i luckly found Surplus Delivery van and then bought 2WD 4L80E behind of 6.5 DIESEL at affodable price. why i was lucky, actually here korea, really hard to find GM cars. most of cars...
DOT 5 IS more better in terms of No Absorbing water from air. but once water ,anyway, permeate into the brake system, a rust in dot 5 system is much more worse than in dot 3/4 system. because water can be completely solved in dot 3/4 making solution that is not more corrosive than water being...
you upgraded it ? there are many option in the same SAE J180 mount. m1008 27si of the distance from bolt to bolt is 8 inch. but 28si mounting bolts distance is 7.8inch i am not sure it can fit. now i am trying to upgrade more bigger alternator.
the next day i tested my brake and worked it again. one day resting could make brake fixed ?
i guess internal seals problem in the master cylinder. so i decided to replace it with brand new master cylinder which i already has.
changing it is very easy jobs. i followed the bleeding procedure...
My brake pedal got suddenly weird. When i drove trails I pushed the brake pedal many times and then clearly noticed i got spongy pedal. It’s very very sudden and scary. But the brake still works……
but there is no resistance until reaching to 3/4 travel of The pedal. there is no any fluid leak...
You fixed it? Mine is similar to yours. My brake works but there is no resistance until reaching to 3/4 travel of The pedal. And there is no any fluid leak in car and master cylinder reservoir still has full of fluids. But No brake pedal pressure but i can feel pressure at almost maximum travel...
You done?
if you put 4l80e in front of np208
There is much cheaper adpater.
GM15724745 or Dorman 926891. Which don’t need any fabrication. Just Bolt-on.
now i am tryting to get info like you did
This is what i want to find. I have also custom A/C . In summer i notice there are hot air under the dash This unknown hot air always comes through heater unit in to inner even when all levers are off positions. I thought outside hot air flows from cowl vent through heater core in. I have to...
hello
i wanna to buy new dash pad for m1008 truck.
i searched a bit but i couln't find. Does coverlay dash pad i found in ROCKAUTO fit exactly ?
anyone could share new part info which can fit without any modification ?
i had the same problem. i just changed DIODE only and then it works perfect till now. Try to change diode ! i did use 1N4007 which is not the same as original one but it works. pattern in your picture looks burnt. if it is you have to connect them manually
the below i had experienced.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!