Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
ah thx i am replacing the brake master cylinder its new i don't want to to have fluid coming out all over . would i just bleed it enough to replace the cylinder ?
ah a link up top thank you as well .
Is there anyone in the seaside area that has one of these ?
I got mine but my brakes failed the peddle is hard to pull back up the master cylinder is not coming back out . I bought a new one . But i want to make sure I am doing this right
someone pulled out in front of me and my wrists...
Thanks all for the help . And do you know what Manual on here covers brakes and adjustments and such for the deuce ? I seem to find one with little info on it . if you can put the link in this thread thanks .
I am having problem no matter what I seem to do i cant stop the leak of my brake fluid around the banjo fittings What size of crush washers do I need on both sides ? :sad:aua
thank you for the help What also manual covers brakes for the m35a2 ?
I wish there was someone in the Portland...
Army Pamphlet 750-8
Took one of the forms and cleaned it up
Equipment Inspection And Maintenance Worksheet
If there is a form of this that's blank I was unable to find it .
If there is not, Hope this can help some people out.
Does anyone know the napa number for part EXAUST DONUT M35A2
I need to replace my EXHAUST DONUTs and do not know where to find one or where to look thank you for the advice
No it was a connection to a private Movie Prop company
ALSO YOU HAVE NICE M109 as well .
Mine was never used for service truck
Mine had all the radio gear and such
so i was told and the research i did on her as well it was a T.O.C Truck
Thanks got mine from Cali it was a calvery truck used in many Hollywood movies
like Hulk,Three Kings,Battle of L.A and Day the earth stood still.
here is my project im doing with my m109
Home - Deuce Luxury Conversion with Fireplace
I looked for threads i may be lost but i can not find the specs of the fulepump inside the tank like the gallons per hr and pressure it uses ?
after i get this info i will remove this post so its not cluttered up thank you for helping me
Also If you reach under you can easily disconnect your low air buzzer under the dash . then you can hear it . or just disconnect the main line from the fuel pump and if nothing shoots out then its not working if heard
I took my Fuel pump out and cleaned it up and fixed it now it runs...
on a deuce half whats the part number for the starter i cant find one on mine at all ?
cause someone is asking me it to look up the right one . thank you
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!