Search results

That is definitely good to know about the jack shaft technique. I was not familiar with it. I assume the jack shaft is the connector between the transmission output and the transfer case? The idea is to put it into 5th for the "best" gear ratio for turning the motor, and have the transfer...

I used this awesome guide today to fix my HH. The button had come off. I was able to find the red/slotted gear tooth by using a bore scope camera pointed at the gear, and then momentarily pressing the starter. It took about 15 tries to get it to the right place. I found it three times in...

I found it! Pages 293-297 of TM9-2320-209-34-2-1. Fuel System group maintenance. I found it! Pages 293-297 of TM9-2320-209-34-2-1. Fuel System group maintenance. -Zoey

Any hints on which TM for this type of overhaul? I got lost reading manuals for awhile there, but I haven't found a source for torque specs yet. -Zoey

Awesome, thanks for the heads up. Now to find a place to get some of the copper washers. -Zoey

I agree... Yeah I felt the same way. A diesel mechanic friend of mine is going to help me out and we're going to have a look at it. His opinion was that we could take it apart, and have a look, and worst case it would go back together and behave the same way. -Zoey

Howdy, I recently acquired my bobbed Deuce and have been making it road worthy. It appears that my 6th injector (closest to firewall) is leaking externally. My research reading tells me this is probably the fuel return cap. I understand there are two gaskets involved a copper gasket and an...