Search results

Thank you for the information, yes we have all the equipment and my guy is a hvac mechanic for homes but is struggling a little on these humvees. Thanks john

Compressor keeps kicking in and out. How much refrigerant goes into the system? What other problems could it be besides being low on refrigerant? Thanks, John 2006 m1152

That was the issue. Thanks john

That may be it, one of my mechanics rob the cable off the truck and I haven’t put it back on so it may be in the on position.

I had one at the beach that did that and it was getting fuel in the air cleaner and filled it up to where it couldn’t get air to run.

Fording intake pipe , thats the two side holes, the ones on the top fender could be two fording hold down clamps? Or the chemical sniffer bracket? TNJMURRAY.com

I have a m1152 that i cant get the fan to stop running, I’ve applied 90 psi to the hose to the fan clutch and it kicks back fine. Ive replace the power steering pump, the beer can, the black module the temp sensor with the good one. I just cant get the 90 psi at the beer can hose. I know the...

I have a rebuilt M936 that has been sitting for a few years, ran great before. I had caged the rear brakes to move it around the yard with my loader and a chain. Got her up and running the other day and went to drive her out of the shop with the brakes still caged and they wouldn't budge...

I will check all that. Thanks john murray

M1152 fan clutch is kicking my ass!! Ill take any and all ideas. I need 90 psi here and im not getting it to disengage the fan clutch. I have a new module , gold pressure valve and heat sensor on the truck. Fan clutch is fine, when I apply air pressure to the hose it releases just fine. There is...