Search results

Tried searching in advance but couldn't find much on this. I was curious if it is possible to plumb in a gravity feed type system into the existing stock fuel tank? I have a 1990 M923A2 and it looks to have 3 different ports on the top of the tank that I believe are the supply, return and vent...

Thanks guys! It has been a fun project truck! Artisan, here is a picture of the rest of the exhaust. I used the elbow that used to turn up into the muffler to turn the exhaust down right after the toolbox. I had it originally straight piped up with a stack right behind the cab but I couldn't...

I just finished up a few more projects in preparation for my Moab trip at the end of the month. Blue Ox exhaust brake with 24v air solenoid that works better than I thought on that big 5 ton! I tested and tuned the back pressure to the recomended 35psi on the 8.3 cummins so i don't float any...

Thanks guys for the ideas and input! Drunkle Scuzzy Yep that's my wheeling rig. I have a trip to Moab in May and the road to get where we camp has a few low spots that make it so we can't take trailers through. This was my option to get my entire rig down to the camp site. I fabricated the...

Well, I'm a long time reader of this site and have had tons of help from reading posts to help build my rigs, but I'm finally starting my first post. I'm wondering if this is a good idea or not since there are only 3 stock mount tabs on each side of the 5 ton from the bed to the frame. I do a...