• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. jmenende

    Breaker help

    Hello Gents. Im having an issue with this breaker in a mep 009b. I have already taken off the contactor close mechanism thats sits on top amd openned the units. The issue is that it will not stay in the closed position even after manually operating it. Any suggestions. reaker
  2. jmenende

    75902lv Master Start Switch for MEP-80x Gens. Who has one for sale?

    I need to change a bad s1 on a mep 806a. The part number on the manual says C10-C57410E. I have a 75902LV on hand. Does anyome know if it would work?
  3. jmenende

    Injection Pump Rebuild Help

    Howdy. I just took out my pump to get it rebuilt and the bushing that on the throttle linkage came apart. Anyone know where to get another. Here is the pic.
  4. jmenende

    DN4M pistons

    Since you already have it apart, check you heating elements in the intake manifold. There is a post where a unit had a bad S1 or k18 relay and the elements stayed on and probably melted. A piece might have made it in and done damage.
  5. jmenende

    803/802A Alternator

    I usually just take mine to a local alternator shop and get them rebuilt. They never have a problem sourcing the parts.
  6. jmenende

    Oldest Mep 803a

    Looks like I just landed the oldest mep 803a. Must have been the sample they sent. 🤣 Yes, it was refurb at letterkeny in 01 and they swapped plates.
  7. jmenende

    Does anyone have a Mep 009b?

    Howdy folks. Im in a bit of a bind and need some pics of the wiring to s3 and the breaker contactor. My 007b was messed with and does not work properly.
  8. jmenende

    glow plug temperature switch

    Anyone know the torque spec for this off the bat?
  9. jmenende

    Questions on newly acquired MEP-802a

    Yikes, on a second look, you are right.
  10. jmenende

    Questions on newly acquired MEP-802a

    Open the top muffler lid and you will see it. If its not there then shim it back in to avoide rattleing.
  11. jmenende

    Questions on newly acquired MEP-802a

    That goes on the muffler exhaust.
  12. jmenende

    M1008 "wait light" issue

    Anyone have a new original glow plug temp sensor to sell?
  13. jmenende

    Trouble Diagnoising Glow Plug Controller

    Dont know, gonna check tommorow.
  14. jmenende

    Trouble Diagnoising Glow Plug Controller

    Ive got a similar problem. My relay will cycle constantly. It burned my original gpc and when i swapped it out for a new modern gpc it still does the same cycle. Im sure my gp are already bad sin it seems this goes one when driving and my warm light no longer turns on.
  15. jmenende

    CUCV Alternator Rebuild

    Anyone have a parts list. The links are dead. Thanks
  16. jmenende

    Improvements on the 'Ultimate Well Nut' upgrade

    I guess the tank needs to get pulled to install the bottom well nut.
  17. jmenende

    Improvements on the 'Ultimate Well Nut' upgrade

    Will this well nut replace the bottom tank drain well nut or just the top one?
  18. jmenende

    MEP-803A: It Runs, It Generates, but it won’t shut off

    If/when you removed the fuel pumps, always leave one installed. This leaves the rack in the correct position and makes them easier to reinstall. If you took all 4 out then you may find it easier to put a bore cam to see the slots align and then put in the pumps.
  19. jmenende

    Questions on newly acquired MEP-802a

    Not serviceable means it can blow up at anytime. I offer you 500$ and take it off your hands. :p
  20. jmenende

    Is there a performance oil pan for the m1008?

    The one i have looks like it took a solid blow and it has about a 10" weld scar across the bottom. I was just looking for something to carry more oil and keep it cooler. Im going to look at the hmmwv 6.2l oil pan. thanks for the sugestions.
View older results
110,879members
165,308threads
2,326,151posts
1,296online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks