• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Suprman

    Snow chains on FMTV tires

    The pewag ones work fine on lmtvs. I have 4 left but none of the little keepers that come in a little plastic bag.
  2. Suprman

    Snow chains on FMTV tires

    If they are for the 395s same as lmtv they fit fine. And they are supposed to fit 1400s also.
  3. Suprman

    M1078 Flat front tire with no help from CTIS

    Spare tires usually have a solid bolt on the banjo so water dosnt get in there. Maybe your spare has the banjo bolt.
  4. Suprman

    M1079 no start and no display on Allison transmission

    There are relays and a fuse in the vim. You can find pinouts online just search allison wtec2 wiring diagram.
  5. Suprman

    winch configuration

    I bet with a little rigging you could make the lmtv winch do that.
  6. Suprman

    A1R Warning about gauges

    He asked how i know what controls the gage bus.
  7. Suprman

    A1R Warning about gauges

    Cat can log into the ecm to make changes to match the speedo to the hs gears.
  8. Suprman

    winch configuration

    The lmtv winch can pull front or back you do have to set the cable up in the direction you want to pull though.
  9. Suprman

    A1R Warning about gauges

    Cat ecm
  10. Suprman

    M1078 with 225hp and high speed gears: pro's and con's

    There is a thread here in the lmtv forum. I think its “m1078 truck pull”.
  11. Suprman

    1078 and 1081 side light window interchange

    The gasket is reuseable
  12. Suprman

    Breather valve on top of tranny M1079

    I had read somewhere about an allison issue with fluid coming out the vent in cold weather. But I would still check the trans fluid level.
  13. Suprman

    Allison Code 2511 Output Speed Sensor/ M1078

    Output speed sensor on bottom of trans. Held on by one bolt. Over the counter allison part.
  14. Suprman

    M1078 with 225hp and high speed gears: pro's and con's

    I have had a lot of lmtvs. Most first gen trucks. Some trucks are a lot peppier than others. If you can find my truck pull vid from a few years ago and you can watch and hear my turbo spool right up. If yours dosnt spool right up then I believe your engine needs to be tuned up by cat. Or you...
  15. Suprman

    M1078 with 225hp and high speed gears: pro's and con's

    I went to the local truck pull after the regear. They had 17k of concrete on the sled it pulled it easy like before with the original gearing. They just ran out of time at the event and didnt get up to the heavier weights that they usually do.
  16. Suprman

    1078 and 1081 side light window interchange

    I have one somewhere here. Do you have the gasket?
  17. Suprman

    1078 and 1081 side light window interchange

    I think they are different. Which one do you need?
  18. Suprman

    M1078 with 225hp and high speed gears: pro's and con's

    I havent noticed any loss. It better matches the drivetrain to the engine power band.
  19. Suprman

    M1083 air brake issue question

    The check valves are under the cab
  20. Suprman

    M1079 no start and no display on Allison transmission

    If the trans control isn’t functional it will prevent crank at the dash push button. M1078 and M1078 first gen trucks will be the same manual. There is only one Vim used in these series of truck.
Top