• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. gimpyrobb

    Steel Soldiers giveaway sponsored by unitedstatesoffreight.com

    Reply
  2. gimpyrobb

    Stripped the temperature sender m35a2

    Are you talking about the one on the flat spot on the intake manifold? Drill a hole, heat it up and use an ease out.
  3. gimpyrobb

    Steel Soldiers giveaway sponsored by hawkerbattery.com

    Entered! Thanks for the opportunity
  4. gimpyrobb

    Mav’s M1088A1 Conversion

    I still have a good amount of those Donaldson housings with filters. I just bought a house AND we're headed to haspin rally this weekend. If you want one, shoot me a pm and gimme a bump on wed.
  5. gimpyrobb

    Noticed a problem with non NOS fuel filters we all use (wix,Napa,etc)

    I have a box of new secondary filters with all new Orings included. PM if anyone needs any
  6. gimpyrobb

    Haspin 2023

    Ill be there!
  7. gimpyrobb

    2023 Findlay Ohio Armed Forces Day - May 18-21 - Buy, Sell and Trade

    Nobody has posted here yet?! Crimony! Cucv2 grill guard Seats wire harnesses m101 racks more to come...
  8. gimpyrobb

    brake lock on wrecker

    On my m62 I just need to pump the brake peddle to get it to release. Is that not the case for your truck?
  9. gimpyrobb

    2023 Findlay Ohio Armed Forces Day - May 18-21

    Check with Ken Spencer, I believe he has some of that style. I know he has adapted rims from hmmwv bolt together rims.
  10. gimpyrobb

    Deuce engine repair

    If you pull the pan, plan on jacking the trucks bumper up a bit. I had a heck of a time getting my pan out till I jacked up the suspension.
  11. gimpyrobb

    Putting IP back in and Timing Refresher

    When timing the IP to the motor, you ONLY need to look under the 4 bolt indicator and TDC. The tooth and arrow under the hydraulic head is to time the hydraulic head to the IP.
  12. gimpyrobb

    Remote Brake Reservoir- Bubbles when brake applied

    Air pack first then furthest to nearest. I do the rear axles first then the front.
  13. gimpyrobb

    Rear bumper options for Bobbed M35A2 Deuce

    Many standard pickup truck hitches are the same width as our deuce frames. You could put one on your truck and have the bumper slid into that while driving on the street, then pull it out when you go on trails.
  14. gimpyrobb

    New in-tank fuel pump

    No, I have never seen a multifuel start after a filter change without the in-tank pump working. there is a bleeder screw on the top, in between the secondary filters on the side of the motor. I turn power on, open the bleeder, and wait for fuel. Close the bleeder and start her up.
  15. gimpyrobb

    Remote Brake Reservoir- Bubbles when brake applied

    Some air will be normal as you are pushing fluid from the remote reservoir into the master reservoir. If you didn't open any of the brake lines you should not need to bleed them.
  16. gimpyrobb

    New to me Deuce with matching trailer - wrenching post

    Wish I knew you were doing this! I have a hydraulic bead breaker you are welcome to use. Give me a buzz when you do more.
  17. gimpyrobb

    Are market lights required to be legal?

    I've got some military surplus marker lights if you decide you wanted some.
  18. gimpyrobb

    FDC bypass/ new fuel tank/ new pump/boost-egt meters

    Try not to lug it, thats bad for them. If you run it hard for a couple hours, it will run even better.
  19. gimpyrobb

    A3 air filter on LDT

    Greg, these are pretty big filters, roughly 14x24. I hate shipping things this big but will. I just replied to your PM.
  20. gimpyrobb

    A3 air filter on LDT

    I have more than you could shake a stick at. Come out to the Findlay rally in May and you won't have to worry about shipping charges. It is a great rally and lots of vehicles and people to meet/see! What a PITA that Donaldson won't let you link directly to one of their products.
110,879members
165,309threads
2,326,155posts
1,399online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks