Search results

since you have the pump, find a saginaw 710IH box and buy the rest of the kit, about $1600

that's gonna be a problem as the shaft turns both directions so it probably cannot be done. you also don't say flow or pressure

12 volt??

that is only about 4000 lbs. the truck doesn't even know it is there.

the forks do not hold any gear engaged in this trans by design, remember this is really old trans. also the syncro dogs are cut straight, not on any angle like modern trans are. what holds the trans in 5th is a feature machined in only one side of the spline on the front of the main shaft. some...

you should consider just getting a 5 ton.

who owns it now?

why not just get the 5 ton with the M4 body on it, you will spend more than this on almost anything else anyway

there's my old unimog!!

there are several things it can be, even some the manual does not cover. basically it means it can generate but the voltage reg is not working. the field is flashed when in start and the output of the gen powers the regulator. remove one of the field wires from the reg and the manual tells you...

if it won't run under 900 rpm likely HH is worn. soon it won't run under 1000 then 1200 then it just won't start.

if it has not been used in years the fuel is likely sticking things up. use lacquer thinner. do NOT ever use air pressure you will destroy the regulator.

wix 51064 is the oil. only goes on 2 1/2 threads but that is about all the threads in the filter anyway.

if there is an issue with the oil fault light it likely will not crank. light must be on first.

most units have a diode so it won't crank. that way it will never start and turn on the dc circuits that would be damaged.

what oil filter for the 903?

if the batteries are reversed, it will not crank. just sayin'

where in md, i have a good cab cheap

the kit and installation instructions can be seen at waterloospecialties.com

for those not in the know, the picture shows the top mounting bracket, the reinforcement is inside the frame and i now remember why. there is a big notch in the frame edge for the original box and i thought the frame needed some help. tom