Search results

Dont forget your trunion bearings, the fitting is down low in between the front and rear duals where the suspension pivots . They are often overlooked and imo can't be overgreased .

I have this plastic M35 rooftop, I've never seen another like it and I can't find anything in the internet like it . I used it for a moment until I got a metal one, it is quite sturdy, does anyone on here run one of these ? I figure there might be someone on here that remembers when these...

... Man I'm so glad I bought a towbar that fits my Deuce, one of the best Investments I've ever made for that truck . I can pull it with my 5 ton or a dump truck, Semi or whatever, I can pull it with my Superduty if I have to, it weighs well over 8,000 lb . Some might say yeah well the whole...

I also am not understanding your term slipping, those cases either go or they don't, they are straight up Gear Drive . Are you running NWF or ORD kit ? I am questioning the Assembly of those cases, I'm also questioning the internals of that 14 bolt that you just installed, because you...

Saw no reason for the stock configuration to leak, yet they did, not anymore Edit: in hindsight I do not at all care for the shiny aluminum parts on my engine, wish I had painted it first and I shall still, with a little brush, maybe filters too with a spray can 😎

I opened the door and saw a little water on the transmission hump, realized there must be a hole in the roof, went up and sealed it with a dab of silicone . That's what I did last week . Here's what I'm going to be doing, but I don't know what week it will be preferably a warmer week . After...

Your converter lockup switch is malfunctioning, there was a thread on here less than a year ago that a person had the same problem they figured it out, just dig around you'll find it, or you could just search the intardwebs and it'll probably bring you back to that thread on here Good luck newb

Thread necro 💀 😃 🍺

The multi-fuel uses an SAE bell housing so if you're REO engine uses an SAE the same diameter then that's a go . So then it's just a matter of the input shaft in the transmission, is it the same transmission ? I don't know, but if it is then that's a go, if not you might be able to use the...

You're getting crappy fuel, it more than likely is that vegetable oil mix Fuel and that vegetable oil attracts and retains water like a mofo . This is what happens when you go to the fuel station and run that "perfectly clean" diesel in your old Deuce so that you won't have any problems, it's...

I think as in remove the dog house cover and the entire top of the trans, I think its like 12 or 15 bolts or so, then you can see the inner workings of the entire transmission and probably spot the problem, it may be something not too complicated that you could remedy with some ingenuity, but at...

Unaware that Bass had seasons, what's the difference between Fall bass and regular Bass ?

I found these in 20 seconds, I'm sure there's more . https://www.rockwelloffroad.com/product-page/wilwood-2-5-ton-pinion-brake-kit-with-hardware https://www.redbarncustoms.net/25-ton-rockwell-axles-and-parts/25-ton-rockwell-pinion-brakes-and-brake-parts/ https://www.beyondprecise.com/

In it to win it

If you look on the return side of your hydraulic system, there is typically a 20 to 40+ year old filter slowing things down .

https://www.steelsoldiers.com/attachments/deuce_wiring_schematic_pdf-pdf.766430/

https://www.steelsoldiers.com/showthread.php?3843-Peter-Bog-s-CAD-deuce-schematic!

So I got that big giant primary fuel filter changed yesterday and it turned into an all afternoon job . The goo that was in it was like nothing I have ever seen before in a fuel system, I could not get it out with solvent, I tried scraping it out, I eventually used a weed burner and burned the...

So after removing all the CTIS junk I discovered that I have only one leaking tire instead of three, so I replaced that one tire and now all my tires hold 55 psi . Painted my rims with Rustoleum flat black which is a little bit shinier than I thought it would be and I think they look great . I...

@clinto said: I don't think a pinion brake is a good idea on these trucks. There are several threads explaining the issues, but driveshaft speed and the open differentials make them not a good match for our trucks. The pinion brake grabs on to the opposite end of the same driveline as the...