Search results

In my neck of the woods the loggers, before the economy went south, used the M818s a lot. They would load the logging trailers in the back forty, and then use the M818s to move the trailers up to the hard road. The on road tractors would then take the trailers to the mill.

Don’t take this the wrong way. I think you are over thinking the issue. If the vehicle, in this case has a current Me. tag you are good to go. I have yet to see any officer pull over a private vehicle and give them any paying paper for having different state registrations between the towing...

Your post reminded me of the “joyful” times at the JWSERE school run by Scout Rangers in the Philippines. You would be surprised how happy one can become when one comes upon some taro plants. Boiled taro and cray fish were a feast. Every so often they would spoil us with rice.

If you don’t have the “equipment” to move it, time to improvise. In your case a simple pallet jack and two sheets of plywood will work. It will take time moving one sheet in front of the other, but it will work.

Since you plan on recovering it with a Deuce that makes things easy. As already posted a High Lift jack is your friend. If you Deuce still has 9X20 tires having a spare for the trailer is solved. I always carry a large tire bar for releasing the landing gear lock. It is easier than pulling it by...

A few things on recovering it. The transport covers on that trailer are not road worthy. Bring some shrink wrap and wrap the whole trailer, then add some tape over that. The sides are trash, the front vinyl as Mike has posted maybe good with bad thread. No reason to destroy good vinyl if...

Good info and I was debating on getting one above the 2000 S/N but down here I don't need a heater and the glass will likely only make the cab hotter. I saw 4 more units with low-low hours sell recently but they were rust eaten and that's something I don't want to have to deal with. Correct...

The later models have a bar that is placed under the front lift arms when working on the machine for safety. The lockout on the left is for the same purpose. I’m not sure about whether the side lockout bar is necessary for DOT transport. However, whenever one is moving a piece of equipment that...

If you can’t find the TMs online or Mike doesn’t have them handy, I have them as a PDF in my computer. It is definitely not a machine to play with. Having the TMs are a must. When it came time to pick mine up from Ft. Meade, I had a local company move it for me. I have a trailer that it will...

I got one off GP last December. They are nice units to have around the house. I was lucky in that the government did a full service, fluids, filters, air filters, and what not. They were even nice enough to install new tires and lights on it, then parked it for a year. It is nice to see our tax...

There could be several things going on. First a little background on trailers. On newer all air systems, after 1976, when the emergency air line is charged the air tank(s) are filled and the spring brakes are released. When the brakes are applied, air goes through the service line, through the...

Too bad you aren’t closer. I still have all the load banks on the front of the M447C trailer. Maybe someone closer may have one you could use.

A blown head gasket will pressurize the cooling system as described. When an oil cooler fails there is usually oil in the coolant as opposed to coolant in the oil. The oil pressure is higher than the coolant pressure. The question is how long was coolant in the oil? Coolant destroys crank...

This was before the time of everyone having cell phone cameras, THANK GOD. Let us just say there was a group that filled a roll off dumpster with water. A couple of immersion heaters were added for heat. Then an out-board motor was clamped to the side for water circulation, just like a Jacuzzi...

The TM for the unit is TM 3-4230-228-10. I just uploaded a copy of the TM in the miscellaneous TM section.

The front glad hands as you are probably aware of are for when the vehicle is being towed. The emergency (red glad hand) side supplies the vehicles air tank(s) from the tow vehicle so the towed vehicles brakes will function while being towed. The check valve is to prevent the loss of air if the...

One of my M818s was doing the same thing. There are six fuel lines at the fuel selector valve. They are known to cause problems over time due to age. If your M818 still has the original lines it would be a good idea to replace them. Contrary to the TM, the only thing that needs to be removed for...

Possible head gasket. Maybe oil cooler, caught just in time. Check the coolant in the tank. If there is any oil in it, if it looks likes chocolate pudding, then it is the oil cooler. A simple test for a leaking head gasket is with a surgical glove. With the coolant reservoir cap off start the...

The best thing to use is a seal driver. They come in kits or individually. This is what they look like in a kit. Maybe you could fabricate something up if there isn’t a metric size that would match up. Placing a seal in the freezer won’t hurt it. And a lite layer of grease on the seal helps for...

This was posted earlier today from the club. Postponement of the 47th East Coast Rally Until 2021 The WAC/BGMVT has been monitoring guidance from local, State and Federal public health officials. Proclamations issued over the last two (2) weeks from MD Governor Hogan includes bans on public...