Search results

Sorry to hear what happened. This is a classic case of old style solenoid contact welding. As mentioned, it is internal to the solenoid itself. Delco Remy is our competitor. I don't have or know their model numbers/fit chart. No direct fit gear reduction starter from our brand. I have...

Who's rooftop solar panels? I put a 6kW array on my house this spring. Have not paid an electric bill since installation in August, including running A/C. They're awesome. Silent, maintenance and fuel free generators!

Removing the flanges stops the front driveline from spinning. The front prop shaft slip spline joint was worn out on my M925a2, at only 20,000 miles. I back-dated mine to the earlier front prop shaft with the carrier bearing to support the weight of the shaft, rather than the spline joint...

You're fine. The heater really just takes the place of the heater core and blower box under hood, requires 2 crescent shaped brackets to do so. It should have more air output that the heater core blower, at least it feels that way when I run my fuel fired heater on a test bench. Not many...

Retirement cakes. ISL swap may actually happen during the downtown @ work between Christmas and New Year.

Wow. I feel like I’m on a job interview. You’re welcome for the pic, it is not my install. That’s everything except asking me to do it for you. I have not installed it yet, so I can answer some, not all. 1. NA 2. I would install a dedicated tank dip tube and pump, as to not risk the...

Good capacity info. One negative about using the M925xx stock hydraulic system is that it really only works properly with the transmission in neutral, same as the winch. A lot of dump truck videos show the truck pulling forward to either spread the load out, or to fully empty the bed if the...

Move to 5 ton mod dept. Then, yes, many have done via several different methods. There is a balance to be struck between max load lift, max tilt angle, and configuration as installed. The self-contained scissor mechanism (CC) is a very reasonably priced option, and position of it is a...

All making sense now, thanks.

He probably found the filter, 3 years ago.

I tried to thank your post like 7 times bro, but it would not let me.

Have somebody else call next week, and see if they still say no reported failures. That's usually the case. You're kind of rough on stuff though, and I think those are Chinese (Newstar)?

It replaces the heater core box under hood. Takes 2 unique brackets to do so. I bought these brackets, nobody had them. Had to do the TM and NSN search, then contact the original supplier. I bought a buddy lunch to do all that because he was bored. Sorry lost all that info years ago, but you...

Ughhhhhhh, below:

Interesting. Specs say exact same. Did you get the alternator from me? Sold a bunch recently, apology I can't keep track. If so, I have a replacement lower brace that allows you to make the stock serpentine belt system "adjustable", to set the tensioner anywhere you want it. I'll send it to...

That's a picture of Simp too. Pants and everything, straight up.

No, having nothing to do if you have a brake problem. More-so if you are having a rapid air loss problem. This button does one thing only, it prevents the spring parking brake from setting when the truck air pressure is bleeding down. It takes a very good understanding of that single sentence...

Could just be alternator failure? I'd go group 31 batteries and a new civilian alternator, even if all the original mil stuff was fine. Do you recall the volt gauge position with the engine running? It would help to easily differentiate the issue if you really want to just find and fix what...

Repost for original question. I received 2 Detroit locking differentials for 5 ton axles, and it included some large springs and other parts as well. Install instructions and/or diagrams beyond TM appreciated.

Two seperate 6v batteries in series vs one 12v is same. Battery cells are in series. Each cell generates 2V. 12V battery has 6 cells in series, 6v has 3 cells in series.