• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Reworked LMTV

    M1083A1 no CTIS Controller

    Ah yes, the "hi Mom!" sign
  2. Reworked LMTV

    How to replace wiring boots?

    I went over those connections with mastic tape. That stuff is awesome. No need to redo all of those connections, unless you are a perfectionist.
  3. Reworked LMTV

    Removing stucked brake drum

    https://www.steelsoldiers.com/threads/diy-brake-drum-puller.172701/
  4. Reworked LMTV

    Removing stucked brake drum

    This attempt however, did not work : )
  5. Reworked LMTV

    Removing stucked brake drum

    Ha!, I had mine working on brake air lines. She actually liked it until I told her there were another 500 lines she needed to replace along each rail in the hot sun.
  6. Reworked LMTV

    Removing stucked brake drum

    I realize now that the minute you tell someone the drums just slide off, you have jinxed yourself!
  7. Reworked LMTV

    Removing stucked brake drum

  8. Reworked LMTV

    Removing stucked brake drum

    I have used an 8 ton harbor freight jack in this manor. Works great!
  9. Reworked LMTV

    Driveline question...

    LOL ok, I "get it". It was just a reference point for others.
  10. Reworked LMTV

    Driveline question...

    FYI: There is a new loctite that forms well in grease / oil, I believe.
  11. Reworked LMTV

    Driveline question...

    Mine came with built loctite on the threads. Probably equivalent.
  12. Reworked LMTV

    Locker location on 1083

    Ugh I don't use FB. Too much data misuse.
  13. Reworked LMTV

    The dreaded CTIS seal, bearing repack job on my MTV

    Yes, I will work on something.
  14. Reworked LMTV

    The dreaded CTIS seal, bearing repack job on my MTV

    Trusty BFH lol
  15. Reworked LMTV

    Locker location on 1083

    Based on comments from Plasa with the 4x4, I would gander that it would be better to just do the middle pumpkin if using non-air lockers. He described some rear end giddiness when the Detroit style lockers lock in. Having the rears not locked in a 6x6 would likely stabilize the truck more when...
  16. Reworked LMTV

    Locker location on 1083

    What is the cost on this?
  17. Reworked LMTV

    Driveline question...

    Spicer, unless you like roll the dice. I have noticed Chinese machining in things like bearings can be horrible. I won't buy Chinese bearings anymore. Got burned on a finish mower with a set. Went out faster than a politician being chased by reporters. I buy Tinkem exclusively now. They have...
  18. Reworked LMTV

    Have you installed 3.07 gears in your truck? Kindly step in I have something to ask

    Larger diameter tires might get around a resultant 3.40:1? I don't know, just asking.
  19. Reworked LMTV

    Interested in opinions on best bang for buck on 80w90 or similar weight synthetic

    I think you are right. If traveling to colder climates, a wider viscosity range would help. The cheapest good synthetic unfortunately is Chinese based Sinopec. I have heard good things about the oil, but have philosophical issues with purchasing it. Sinopec is now on the Mercedes list of...
  20. Reworked LMTV

    Interested in opinions on best bang for buck on 80w90 or similar weight synthetic

    I have 3 axles to drain and fill. Interested in opinions on best bang for buck on 80w90 or similar weight synthetic. What brand do you like to use? Where do you find the best prices.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks