• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Brakes shoes slow release

    Ok thanks
  2. R

    Brakes shoes slow release

    I'm sold. Thanks for all the great advice. Best regards to all
  3. R

    Brakes shoes slow release

    Even though good flow when power bleeding?
  4. R

    Brakes shoes slow release

    I've been having problem with brakes showy retracting. I've rebuilt the air pack and master cylinder and power bleed system. Had good flow no leaks and all fittings are secure. Installed new brake peddle retention spring, was missing. All that is left now is wheel cylinder. Next is cheap and...
  5. R

    Front main seal replacement

    One word makes a big difference. My bad good luck
  6. R

    Front main seal replacement

    I replaced both seals. Remove both hubs wit axle on jack stands, wheels chalked, in gear. I then used a long bar and knock out both seal holders from the opposite side through the front axle. Easy peasey lemon squeezey. Hope this helps
  7. R

    M35a2 Boyce Equipment

    Welcome to steel soliders. Hope you enjoy your time here. As for taking a 31' camper into the woods... Not a good idea. The truck has a notorious bad turning radius. If y get in a tight spot you will not be able to get out. I would not even do it with a tear drop camper. Hope this helps with...
  8. R

    1969 Kaiser M35A2 No Crank-No Dash Power

    I'd start with master switch. Test for continuity. If any doubt replace it. Lights will work even if master is in off position. Then wire brush all batt and frame connections. Sitting for 20 years will put master switch in question for me. Hope this helps. Best of luck to you.
  9. R

    Air pack rebuild kits

    Thank you
  10. R

    Air pack rebuild kits

    😊 Thanks for the reply. Is there one kit brand better than others or just one manufacturing for all brands.
  11. R

    Air pack rebuild kits

    Hello all. Are the airpack rebuild kit worth it or just create more problems? Or do I just bite the bullet and get a new unit? Thanks in advance for mature answers
  12. R

    M35A2 Alignment?

    My toe in was way off. Tires wore out to fast. Looked it up and heres what I found. Set parking break and chlk one set of duals both ways. Engine off. Safety first! From flat surface measure 18" vertical on front and back of both tires make straight, horizonal line there. Try to find centers...
  13. R

    Looking for a hydraulic head for a M35A2

    Hello Frank. I have a very good used complete fuel pump assembly including timing gear for a reasonable offer. Is clean ready to install.
  14. R

    New guy from Idaho county Idaho

    Ok. Thank you 😊
  15. R

    New guy from Idaho county Idaho

    Thanks. Look me up if this way
  16. R

    Favorite noise your deuce makes

    At speed on the highway like everyone else
  17. R

    New guy from Idaho county Idaho

    Msg/question for moderators... Where the heck do I sign up to be a paying member???
  18. R

    New guy from Idaho county Idaho

    Nice. Iv sold logs to ifg in the past. Worked there some time ago.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks