Search results

Post a link to your auction and I'll dig through the pics. I'll also go find you a link for cage bolts . Brb Edit - these are the correct bolt, but the price is about 2x to the high side. https://midwestmilitaryequipment.com/caging-bolt-for-lmtv-mtv-fm

I can't tell you how much I appreciate this!!! This is exactly what I was looking for.

The place in WI was probably Feltz tire. More pressure might have taken stress off the sidewalls.

I've blown a 14.00 (48") at highway speeds more than once without run flats. And 11.00s also (42"). It's not as big of a deal as you'd think.

I've got date code 2003 Goodyear D range tires on mine. 50psi. I've driven them a lot, including a trip from KS to FL and back.

I've got a garden variety 2dr soft top M998. I've also got the pictured mile marker hydraulic winch and mounting plate. Presumably I need a couple of hydraulic hoses. What else? Are there instructions somewhere in the TM for how to install?

Mine's a 6.2 3L80, nothing at all special about it, and I wouldn't consider taking $10k for it, even if I were hurting for funds. I've also driven mine all over the country (AZ, TX, NM, LA, OK, NE, WY, IA, SD, KS, MO, IL, FL, AL, GA, TN, KY, more than once) without issue. Everything works. I...

A little rough. A little dirty. So clean it up and put a coat of 383 green behr house paint on it. I don't see any major problems. Looks to me like you got a screaming deal.

Where in MO are you?

No, I ordered a new gasket and replaced it in its entirety. I decided a pre-made gasket would be an easier install with less chance of a leak under the constraints I was working with. Thank you to everyone who contributed knowledge to the decision making process.

And it's all back together, no longer leaking, and delivered to the customer.

Here's a picture. Note the complete discontinuity in the existing gasket -

I've got an unused set in KS still in the crate.

I couldn't. So I drained some coolant into a clean bucket and pulled it. Better access can only make matters easier when it's time to reassemble. How about the small coolant overflow tank and associated bracket? Looks like it needs to go, especially the bracket. Last time I did a valve cover...

Do I need to remove the front coolant hose?

Anything I need to know regarding pulling the valve cover? Thanks!

Anybody changed the valve cover gasket on one of these? Got a part number or recommended part? I've got black permatex. I'm thinking a solid gasket is probably better. Edit - part number is 3905449. Thanks

This` Just remove the injectors and allow the oil to squirt out. Like jbulach I also think there may be water in the pan.

@RGS20inophir needs to see this

Don't scrap it no matter what. If it doesn't end up going to Nick, contact me and I have a couple of ideas for either a temporary or permanent home.